iec103/src/buban104.cpp

//***************************************************************
//*	  					  buban104.cpp						    *
//*	    			      aaawen 2005.09.14						*
//***************************************************************
//_DEBUG_MSG_,_OS_WINDOWS_DEBUG_
#ifndef _WIN32
#include <sys/types.h>
#include <unistd.h>

#include "commport.h"
// #include "baohulib/serialport.h"

#else
#include "commport.h"
#include "udpcomm.h"
#include "display.h"
#endif
#include <math.h>
#include <time.h>
#include <stdlib.h>
#include "buban101.h"
#include "buban104.h"
#include "scadaprotect.h"

#include "MySQLAdo.h"

extern SIO_PARAM_DEF    SioParam[];
extern FUNCTION_CALL	*FunCallPtr;
extern	void			*pvconf_handle;
extern	void			*pvportconf_handle;
extern  void			*pvdataconf_handle;
extern  char			pvDataFileName[256];
extern  char			IniFilePath[256];

const char  *gpStrBuban104Cmd[BUBAN104_TIMER_CMD_NUM] =
{
		"总召唤电度数据",
		"召唤初始化数据",
		"帧序应答"
};

/*!
	组织结构:链路(间隔)+装置
*/
const char *gpStrBuban104ConfigInfo[] =
{ 
	" ; ***** 部颁104规约参数定义 *****",
	" ",
	" ; 所有命令召唤周期均以秒为单位,可以为xx.xxx秒。",
	" ; 注意:104规约只支持网络通讯,作为主站时是客户方式,作为子站时是服务器方式。",
	" ;      网络端口 = 2404。",
	" 站地址 = 1                ; 缺省= 0 。",
	" 总召唤电度数据 = 120",
	" 召唤初始化数据 = 300",
	" 帧序应答 = 20",
	" ; 在对方超时时间之内发送帧序应答帧。",
	" 超时时间 = 3.0",
	//" 转发返校超时时间 = 10.0",
	" 转发是否要求应答 = 0",
	" 超时发送测试帧 = 0",
	" ; =0：超时不发送测试报文而是帧序应答报文(缺省值)，=1：发送测试报文",
	" 遥控方式=0",
	" ; =0：双点遥控(缺省)，=1：单点遥控。",
	" ",
	" 遥测信息体起始地址=0x701",
	" 遥信信息体起始地址=0x001",
	" 遥脉信息体起始地址=0xC01",
	" 遥控信息体起始地址=0xB01",
	" ;以上信息体地址可以配置,缺省值为97版部颁104所规定值",
	" ",
	" 帧序应答尺寸=2",
	" ", 
	" 版本号 = 1",
	" ;=0 是buban104(缺省值); =1 是IEC_870_5_104规约",
	" 发布时间=2000",
	" ;=1997; =2000(缺省值)",
	" 转发遥测类型标识 = 21",
	" ",
	"*******部颁104规约结束*******",
	"",	// 结束标志(中间不能含有该空字符串)
};

//********************************************************************
//*						   读取配置函数	        			         *
//*参数：int commid     : 端口号                                     *
//********************************************************************
void Buban104ReadConfig(int commid)
{
	int     i;
	char	szSection[128], szbuf[128];
	char    szPortConfig[256];
	pBUBAN104PORTPARAM pPortParam;

#ifdef OS_LINUX
    strcpy(szPortConfig, "portconfig.ini");
#else
    //GetCurrentDirectory(sizeof(szDir), szDir);
	sprintf(szPortConfig, "%s/portconfig.ini", IniFilePath);
#endif

	SioParam[commid].ExtInfo = HEAP_MALLOC(sizeof(BUBAN104PORTPARAM));

	if(!SioParam[commid].ExtInfo)
	{
		sprintf(szbuf, "WARN(%04d): commid_%02d ExtInfo=malloc(%d) failed.\n", 
			_getpid(), commid, sizeof(BUBAN104PORTPARAM));
		DebugPrint(szbuf);
		return;
	}

	memset(SioParam[commid].ExtInfo, 0, sizeof(BUBAN104PORTPARAM));        

	pPortParam = (pBUBAN104PORTPARAM)SioParam[commid].ExtInfo;

	/* 只有在SioParam[commid].m_psBaoHu非空时，才会运行到这里 */
	pPortParam->m_psBaoHu = SioParam[commid].m_psBaoHu;

	sprintf(szSection, "Port%d", commid+1);

	if(GetPrivateProString(szSection, "站地址", "0", szbuf, 120, szPortConfig) > 0)
	{
		pPortParam->wLinkAddr = atoi(szbuf);
	}
	// 轮询指令配置
	for(i=0; i<BUBAN104_TIMER_CMD_NUM; i++)
	{
		GetPrivateProString(szSection, (char *)gpStrBuban104Cmd[i], "0", szbuf, 120, szPortConfig);
		pPortParam->CmdTime[i].CmdTimerConst = (long)(atof(szbuf)*1000/TIMER_CNT);
		if(pPortParam->CmdTime[i].CmdTimerConst > 5)
		{
			pPortParam->CmdTime[i].CmdTimerCnt = pPortParam->CmdTime[i].CmdTimerConst - 5;
		}
	}

	if(GetPrivateProString(szSection, "超时时间", "20.0", szbuf, 120, szPortConfig) > 0)
	{
		pPortParam->lTimeOutConst = (long)(atof(szbuf)*1000/TIMER_CNT);
	}

	pPortParam->ProvAckOrNot = GetPrivateProInt(szSection, "转发是否要求应答", 0, szPortConfig);
	if(pPortParam->ProvAckOrNot > 0)
	{
		pPortParam->ProvAckOrNot = 1;
	}
	else
	{
		pPortParam->ProvAckOrNot = 0;
	}

	// wen 2005.10.28 修改超时时是否发送测试报文
	pPortParam->lTimeOutSendTest = GetPrivateProInt(szSection, "超时发送测试帧", 0, szPortConfig);

	if(GetPrivateProString(szSection, "遥控方式", "0", szbuf, 120, szPortConfig) > 0)
	{
		pPortParam->YkMode = atoi(szbuf);
	}
	
	pPortParam->iAiBaseAddr = GetPrivateProInt(szSection, "遥测信息体起始地址", INFO_AI_BASEADDR, szPortConfig);
	pPortParam->iDiBaseAddr = GetPrivateProInt(szSection, "遥信信息体起始地址", INFO_DI_BASEADDR, szPortConfig);
	pPortParam->iPiBaseAddr = GetPrivateProInt(szSection, "遥脉信息体起始地址", INFO_PI_BASEADDR, szPortConfig);
	pPortParam->iYkBaseAddr = GetPrivateProInt(szSection, "遥控信息体起始地址", INFO_YKYT_BASEADDR, szPortConfig);

	pPortParam->m_iFrameSize = GetPrivateProInt(szSection, "帧序应答尺寸", MAX_FRAMEMATCHING_SIZE, szPortConfig);

	pPortParam->RtuVersion = GetPrivateProInt(szSection, "版本号", 0, szPortConfig);
	pPortParam->m_iPublishYear = GetPrivateProInt(szSection, "发布时间", 2000, szPortConfig);

	pPortParam->m_bProvAiType = GetPrivateProInt(szSection, "转发遥测类型标识", 13, szPortConfig);	
	
	InitBuban104CommandBuffer(commid);
}
// 
// 
//********************************************************************
//*						  读取端口数据函数        			         *
//*参数：int commid     : 端口号                                     *
//*      u_char buf     : 数据源缓冲区指针                           *
//*      int len        : 数据源长度                                 *
//********************************************************************
void Buban104RecvData(int commid, u_char *buf, int len)// 规约读数据处理
{
	int    i;
	pBUBAN104PORTPARAM pPortParam;
#ifdef _DEBUG_MSG_
	char   szbuf[256];
#endif

	if(!IsExtInfoPtr(commid))
		return;
	
	pPortParam = (pBUBAN104PORTPARAM)SioParam[commid].ExtInfo;
	printf("recvbuf: ");
	for (i = 0; i < len; i++)
		printf("%02X ", buf[i]);
	printf("\n");

	for(i=0; i<len; i++)
	{
		switch(pPortParam->m_psBaoHu->m_iRevStatus)
		{
			case 0:// 0x10 / 0x68
				pPortParam->m_iRecvLen = 0;				
				if(buf[i] == 0x68)
				{
					pPortParam->m_psBaoHu->m_iRevStatus++;
					pPortParam->m_au8RecvBuf[pPortParam->m_iRecvLen++] = buf[i];
				}
				else
				{
					pPortParam->m_psBaoHu->m_iRevStatus = 100;
					pPortParam->m_au8RecvBuf[pPortParam->m_iRecvLen++] = buf[i];
				}
				break;
			case 1:// length				
				pPortParam->m_au8RecvBuf[pPortParam->m_iRecvLen++] = buf[i];
				pPortParam->m_psBaoHu->m_iNeedRevLength = buf[i];
				if(pPortParam->m_psBaoHu->m_iNeedRevLength <= 0)
				{
					pPortParam->m_psBaoHu->m_iRevStatus = 100;
				}
				else
				{
					pPortParam->m_psBaoHu->m_iRevStatus++;
				}
				break;
			case 2:// 正确接收数据
				pPortParam->m_psBaoHu->m_iNeedRevLength--;
				pPortParam->m_au8RecvBuf[pPortParam->m_iRecvLen++] = buf[i];
				if(pPortParam->m_psBaoHu->m_iNeedRevLength > 0)
					break;

				Buban104ProcessData(commid, pPortParam, TRUE);
				pPortParam->m_psBaoHu->m_iRevStatus = 0;
				pPortParam->m_psBaoHu->RevCmdFlag = 1;				
#ifdef _WIN32
				if((GetCurPort() == commid) && IsRealDataDisp())
				{
					WatchDataPutDispBuf(commid, SDS_SIO_RECV_DATA, 
						(BYTE *)pPortParam->m_au8RecvBuf, pPortParam->m_iRecvLen);
				}
#endif
				//pPortParam->LinkOkCnt = 0;
				break;
			case 100:// 错误接收数据
			default:
				if(buf[i] == 0x68)
				{
#ifdef _WIN32
					// wen 2004.11.22 增加显示
					if((GetCurPort() == commid) && IsRealDataDisp())
					{
						WatchDataPutDispBuf(commid, SDS_SIO_RECV_DATA, 
							(BYTE *)pPortParam->m_au8RecvBuf, pPortParam->m_iRecvLen);
					}
#endif
					Buban104ProcessData(commid, pPortParam, FALSE);
					SioParam[commid].ErrMsgNum += pPortParam->m_iRecvLen;
					pPortParam->m_psBaoHu->m_iRevStatus = 1;
					pPortParam->m_iRecvLen = 1;
					pPortParam->m_au8RecvBuf[0] = buf[i];
				}
				else
				{
					pPortParam->m_au8RecvBuf[pPortParam->m_iRecvLen++] = buf[i];
					if(pPortParam->m_iRecvLen > 200)
					{
#ifdef _WIN32
						// wen 2004.11.22 增加显示
						if((GetCurPort() == commid) && IsRealDataDisp())
						{
							WatchDataPutDispBuf(commid, SDS_SIO_RECV_DATA, 
								(BYTE *)pPortParam->m_au8RecvBuf, pPortParam->m_iRecvLen);
						}
#endif
						Buban104ProcessData(commid, pPortParam, FALSE);
						SioParam[commid].ErrMsgNum += pPortParam->m_iRecvLen;
						pPortParam->m_iRecvLen = 0;
					}
				}
				break;
		}
	}

#ifdef _DEBUG_MSG_
	sprintf(szbuf, "wen: commid = %d, send=%d, recv=%d, error=%d, lost=%d\n", commid, 
		SioParam[commid].SendCharNum, SioParam[commid].RecvCharNum, 
		SioParam[commid].ErrMsgNum, SioParam[commid].LostSyncCnt);
	DebugPrint(szbuf);
#endif
}

//********************************************************************
//*						  定时器处理函数        			         *
//*参数：int commid     : 端口号                                     *
//********************************************************************
void Buban104Timer(int commid)
{
	BUBAN104PORTPARAM	*pPortParam;

	if(IsExtInfoPtr(commid) == FALSE)
	{
		return;
	}

	pPortParam = (pBUBAN104PORTPARAM)SioParam[commid].ExtInfo;

	if(pPortParam->LinkOk)
	{
		// 超时计数
		pPortParam->lTimeOutCnt++;
	}
	// 如果为转发端口，则不进行轮询指令的生成。
	if(PROTOCOL_SLAVE != pPortParam->m_psBaoHu->PortType)
	{
		Buban104FindNextCmd(commid);
	}
	else
	{
		Buban104FindNextProvCmd(commid);
	}
	
	Buban104SendCmdFormPollCmdBuf(commid);
}

//********************************************************************
//*						  遥控遥调数据处理函数     			         *
//*参数：int commid     : 端口号                                     *
//*      u_char buf     : 数据源缓冲区指针                           *
//*      int len        : 数据源长度                                 *
//********************************************************************
void Buban104YkYtProcess(int commid, u_char *buf, int len)		// 遥控遥调处理
{
	int				portno, ykytpnt;
	int				iDirect;

	// buf[0] --- 端口号(=commid)
	// buf[1]
	// buf[2]
	// buf[3]
	// buf[4] --- 控点号
	// buf[5]
	// buf[6]
	// buf[7]
	// buf[8] --- 操作类型(遥控:1=选择,2=执行,3=取消,7=直控; 
	//                     遥调:4=选择,5=执行,6=取消,8=急停)
	// buf[9] --- 控制状态(1=分到合，2=合到分)
	//                    (最高位为1时，为返校命令, 1=控合, 2=控分, 3=失败)
	// 在转发遥控数据点中，只保留了要转发的控点号，实际的端口号应该是该转发点的端口
	// 该转发点并没有指定虚拟的转发控点，则控点和转发点的点号一致。

	if(IsExtInfoPtr(commid) == FALSE)
	{
		return;
	}

	iDirect = buf[9] & 0x80;
	portno = buf[0]+buf[1]*256+buf[2]*65536+buf[3]*16777216;
	ykytpnt = buf[4]+buf[5]*256+buf[6]*65536+buf[7]*16777216;

	// 返校信息(反馈信号)
	if(iDirect)
	{
		Buban104ProvMakeYkYtCommand(commid, buf, len);
	}
	else
	{
		MakeBuBan104YkYtCommand(commid, buf, len);
	}
}

//********************************************************************
//*						  系统下发对时函数        			         *
//*参数：int commid     : 端口号                                     *
//********************************************************************
void Buban104SendSystemTime(int commid)		// 系统对时
{
	BUBAN104PORTPARAM *pPortParam;

	if(IsExtInfoPtr(commid) == FALSE)
	{
		return;
	}

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	if(2 != pPortParam->m_psBaoHu->CheckTime)
	{
		return;
	}

	if(pPortParam->Initdata)
	{
		if(PROTOCOL_SLAVE != pPortParam->m_psBaoHu->PortType)
		{
			MakeBuban104Command(commid, RTU_TIME);
		}
	}
}

//********************************************************************
//*						  系统退出时规约处理函数   			         *
//*参数：int commid     : 端口号                                     *
//********************************************************************
void Buban104Exit(int commid)
{
	// 释放所有分配的内存
}

// 该函数用来驱动由转发端口下发到实际装置的保护命令
void Buban104BaoHuCmdProcess(int commid, RTUMSG *rtumsg, BOOL bUpData)
{
}

int Buban104GetBaohuDataBase(int commid, int iProvAddr, GROUPDEF **ppBaoHuDB)
{
	return 0;
}
/////////////////////////通用函数接口结束///////////////////////////////

/////////////////////////buban104公共函数接口///////////////////////////
//指令缓冲区初始化
void InitBuban104CommandBuffer(int commid)
{
	pBUBAN104PORTPARAM pPortParam;

	pPortParam = (pBUBAN104PORTPARAM)SioParam[commid].ExtInfo;
	pPortParam->LinkOk = false;
	
	// wen 2005.09.15 将该标识修改为true后，
	// 在主站下发总召命令和总召电度后，会将其标识置为false；
	// 而子站端不会受此标识的影响，标识为false，不下发数据。
	//pPortParam->Initdata = false;
	pPortParam->Initdata = true;

	pPortParam->bAckRight = true;
	pPortParam->bStopComm = false;
	pPortParam->bCloseSocket = false;
	pPortParam->CurCmdIdx = 0;
	pPortParam->wRecvSequence = 0;
	pPortParam->wSendSequence = 0;
	pPortParam->wAckSequence = 0;
	pPortParam->lTimeOutCnt = 0;	
	ClearAllCmdFromPollCmdBuf(commid);
}

//关闭socket通讯
void Buban104CloseSocket(u_32 commid)
{
#ifdef OS_LINUX
	CloseNetPort(commid);
#endif
}
/////////////////////////buban104公共函数接口结束///////////////////////

void Buban104ProvMakeYkYtCommand(int commid, u_char *buf, int len)
{
	// buf[0] --- 端口号(=commid)
	// buf[1]
	// buf[2]
	// buf[3]
	// buf[4] --- 控点号
	// buf[5]
	// buf[6]
	// buf[7]
	// buf[8] --- 操作类型(遥控:1=选择,2=执行,3=取消,7=直控; 
	//                     遥调:4=选择,5=执行,6=取消,8=急停)
	// buf[9] --- 控制状态(1=分到合，2=合到分)
	//                    (最高位为1时，为返校命令, 1=控合, 2=控分, 3=失败)
	// 在转发遥控数据点中，只保留了要转发的控点号，实际的端口号应该是该转发点的端口
	// 该转发点并没有指定虚拟的转发控点，则控点和转发点的点号一致。

	int		ykpoint, iLen;
    char	commandbuf[MAX_POLLCMD_BUF_LEN];
	BOOL	bHaveOrder = FALSE;
	BUBAN104PORTPARAM	*pPortParam;

	if(IsExtInfoPtr(commid) == FALSE)
	{
		return;
	}

	if((buf[9] & 0x80) == 0)
	{
		return;
	}

	pPortParam = (pBUBAN104PORTPARAM)SioParam[commid].ExtInfo;
	
    memset( (char*)commandbuf, 0x00, MAX_POLLCMD_BUF_LEN );
    
	ykpoint = buf[4]+buf[5]*256+buf[6]*65536+buf[7]*16777216;
	ykpoint += pPortParam->iYkBaseAddr - 1;

	commandbuf[0] = 0x68;
	commandbuf[1] = 14;
	switch(pPortParam->YkMode)
	{				
		case CONTROL_SINGAL:		// 单点控制
			commandbuf[6] = 45;
			break;
		case CONTROL_DOUBLE:		// 双点控制
		case CONTROL_DIRECT:		// 直接控制
			commandbuf[6] = 46;//(rtumsg->MsgData[3] == 1) ? 46 : 47;
			break;
	}
	commandbuf[7] = 1;
	//commandbuf[8] 传送原因
	iLen = 9;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = LOBYTE(LOWORD(ykpoint));
		commandbuf[iLen++] = HIBYTE(LOWORD(ykpoint));
	}
	else
	{
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = LOBYTE(LOWORD(ykpoint));
		commandbuf[iLen++] = HIBYTE(LOWORD(ykpoint));
		commandbuf[iLen++] = LOBYTE(HIWORD(ykpoint));
	}
	
	switch(buf[8])
    {
        case 1:
        case 4:		// 选择
			bHaveOrder = TRUE;
			commandbuf[8] = 7;
			commandbuf[iLen] = 0xfc;
			break;
		
		case 2:
		case 5:         // 执行
			bHaveOrder = TRUE;
			commandbuf[8] = 7;			
			commandbuf[iLen] = 0x7c;
			break;
    
		case 3:
		case 6:
			bHaveOrder = TRUE;
			commandbuf[8] = 9;
			commandbuf[iLen] = 0xfc;
			break;
	}

	if( bHaveOrder )
	{
		if((buf[9] & 0x03) == 0x03)
		{
			commandbuf[8] |= 0x40;
		}
		else
		{
			// 控分还是控合
			if((buf[9] & 0x03) == 0x01)// 控合
			{
				if(CONTROL_SINGAL == pPortParam->YkMode)
				{
					commandbuf[iLen++] |= 1;
				}
				else
				{
					commandbuf[iLen++] |= 2;
				}
			}
			else// 控分
			{
				if(CONTROL_SINGAL != pPortParam->YkMode)
				{
					commandbuf[iLen++] |= 1;
				}
			}
		}

		PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, (char *)commandbuf, iLen);
	}

	if(ShmGetDispYkYtFlag())
	{
		printf("TIP_(%04d): commid =%d ykytpnt=%d, op=%d checked.\n", 
			_getpid(), commid, ykpoint, (buf[9] & 0x7F));
	}
}

//===========================以下为指令生成函数=======================
/*!
	\brief 寻找并生成下一条命令
	\param u_32 portno : RTU端口号
	\param i_32 iBuIdx : 间隔装置索引
*/
void MakeBuban104Command(u_32 commid, u_char cmdidx)
{
	int					i, iLen;
	DAY_TIME			sCurTime;
	char				commandbuf[MAX_POLLCMD_BUF_LEN];
	BUBAN104PORTPARAM	*pPortParam;

	memset( commandbuf, 0, sizeof( commandbuf ) );

	pPortParam = (pBUBAN104PORTPARAM)SioParam[commid].ExtInfo;

	iLen = 0;
	switch ( cmdidx )
    {
		// format-i
		case RTU_TIME:				// 时间同步
			GetLocalTimeEx(&sCurTime);
			commandbuf[0] = 0x68;
			iLen = 6;
			commandbuf[iLen++] = 103;
			commandbuf[iLen++] = 1;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = 6;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			else
			{
				commandbuf[iLen++] = 6;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			sCurTime.mSec = sCurTime.Sec * 1000 + sCurTime.mSec;
			commandbuf[iLen++] = sCurTime.mSec % 256;
			commandbuf[iLen++] = sCurTime.mSec / 256;
			commandbuf[iLen++] = (u_char)sCurTime.Min;
			commandbuf[iLen++] = (u_char)sCurTime.Hour;
			commandbuf[iLen++] = (u_char)sCurTime.Day;
			commandbuf[iLen++] = (u_char)sCurTime.Month;
			commandbuf[iLen++] = (u_char)(sCurTime.Year%100);
			commandbuf[1] = (BYTE)(iLen - 2);
			PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, commandbuf, iLen);
			break;

		case ASK_DI_DATA:	// 召唤2级数据YX
			for ( i = 0; i < (pPortParam->m_psBaoHu->DiNum+MAX_GROUP_DINUM-1)/MAX_GROUP_DINUM; i++)
			{
				commandbuf[0] = 0x68;
				//commandbuf[1] = 14;
				iLen = 6;
				commandbuf[iLen++] = 100;
				commandbuf[iLen++] = 0;
				if(VER_BUBAN_104 == pPortParam->RtuVersion)
				{
					commandbuf[iLen++] = 5;
					commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;

				}
				else
				{
					commandbuf[iLen++] = 5;
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
				}
				commandbuf[iLen++] = 21 + i;
				commandbuf[1] = (BYTE)(iLen - 2);
			    PutPollCmdToBuf(commid, NORMAL_POLL_CMD, 0, commandbuf, iLen);
			}
			break;

		case ASK_AI_DATA:	// 召唤2级数据YC
			for ( i = 0; i < (pPortParam->m_psBaoHu->AiNum+MAX_GROUP_AINUM-1)/MAX_GROUP_AINUM; i++)
			{
			    commandbuf[0] = 0x68;
				//commandbuf[1] = 14;
				iLen = 6;
				commandbuf[iLen++] = 100;
				commandbuf[iLen++] = 0;
				if(VER_BUBAN_104 == pPortParam->RtuVersion)
				{
					commandbuf[iLen++] = 5;
					commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
				}
				else
				{
					commandbuf[iLen++] = 5;
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
				}
				commandbuf[iLen++] = 29 + i;
				commandbuf[1] = (BYTE)(iLen - 2);
				PutPollCmdToBuf(commid, NORMAL_POLL_CMD, 0, commandbuf, iLen);
			}
			break;

		case ASK_PI_DATA:	// 召唤2级数据YM
			for ( i = 0; i < (pPortParam->m_psBaoHu->PiNum+MAX_GROUP_PINUM-1)/MAX_GROUP_PINUM; i++)
			{
			    commandbuf[0] = 0x68;
				//commandbuf[1] = 14;
				iLen = 6;
				commandbuf[iLen++] = 101;
				commandbuf[iLen++] = 0;
				if(VER_BUBAN_104 == pPortParam->RtuVersion)
				{
					commandbuf[iLen++] = 6;
					commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
				}
				else
				{
					commandbuf[iLen++] = 6;
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
					commandbuf[iLen++] = 0;
				}
				commandbuf[iLen++] = 2 + i;
				commandbuf[1] = (BYTE)(iLen - 2);
				PutPollCmdToBuf(commid, NORMAL_POLL_CMD, 0, commandbuf, iLen);
			}
			break;

		case ASK_PI:		//召唤电度量
			commandbuf[0] = 0x68;
			//commandbuf[1] = 14;
			iLen = 6;
			commandbuf[iLen++] = 101;
			commandbuf[iLen++] = 1;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = 6;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;

			}
			else
			{
				commandbuf[iLen++] = 6;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			// wen 2006.04.03 发布时间97版和2000版组分配不同
			if(pPortParam->m_iPublishYear == 1997)
			{
				commandbuf[iLen++] = 0x41;
			}
			else
			{
				commandbuf[iLen++] = 0x45;
			}

			commandbuf[1] = (BYTE)(iLen - 2);
			PutPollCmdToBuf(commid, NORMAL_POLL_CMD, 0, commandbuf, iLen);
			pPortParam->Initdata = false;
			break;

		case ASK_ALL_DATA:// 召唤初始化数据
			commandbuf[0] = 0x68;
			//commandbuf[1] = 14;
			iLen = 6;
			commandbuf[iLen++] = 100;
			commandbuf[iLen++] = 1;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = 6;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			else
			{
				commandbuf[iLen++] = 6;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			commandbuf[iLen++] = 20;
			commandbuf[1] = (BYTE)(iLen - 2);
		    PutPollCmdToBuf(commid, NORMAL_POLL_CMD, 0, commandbuf, iLen);
			pPortParam->Initdata = false;
			break;

		// format-s
		case FORMAT_S:				// S-格式
			// wen 2005.09.21 如果缓冲区内有数据，则不生成S帧
			if(CheckPollCmdBufEmpty(commid) <= 0)
			{
				break;
			}
			commandbuf[iLen++] = 0x68;
			commandbuf[iLen++] = 4;
			commandbuf[iLen++] = 0x01;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			PutPollCmdToBuf(commid, FAST_POLL_CMD, 0, commandbuf, iLen);
			break;

		// format-u
		case FORMAT_U_START_ACT:	// U-格式启动
			commandbuf[iLen++] = 0x68;
			commandbuf[iLen++] = 4;
			commandbuf[iLen++] = 0x07;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, commandbuf, iLen);
			break;

		case FORMAT_U_START_CON:	// U-格式启动应答
			commandbuf[iLen++] = 0x68;
			commandbuf[iLen++] = 4;
			commandbuf[iLen++] = 0x0b;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			PutPollCmdToBuf(commid, FAST_POLL_CMD, 0, commandbuf, iLen);
			break;

		case FORMAT_U_STOP_ACT:		// U-格式停止
			commandbuf[iLen++] = 0x68;
			commandbuf[iLen++] = 4;
			commandbuf[iLen++] = 0x13;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, commandbuf, iLen);
			break;

		case FORMAT_U_STOP_CON:		// U-格式停止应答
			commandbuf[iLen++] = 0x68;
			commandbuf[iLen++] = 4;
			commandbuf[iLen++] = 0x23;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			PutPollCmdToBuf(commid, FAST_POLL_CMD, 0, commandbuf, iLen);
			break;

		case FORMAT_U_TEST_ACT:		// U-格式测试
			commandbuf[iLen++] = 0x68;
			commandbuf[iLen++] = 4;
			commandbuf[iLen++] = 0x43;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, commandbuf, iLen);
			break;

		case FORMAT_U_TEST_CON:		// U-格式测试应答
			commandbuf[iLen++] = 0x68;
			commandbuf[iLen++] = 4;
			commandbuf[iLen++] = (char)0x83;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			commandbuf[iLen++] = 0x00;
			PutPollCmdToBuf(commid, FAST_POLL_CMD, 0, commandbuf, iLen);
			break;

		default:
			break;
    }
}

//生成遥控遥调指令
void MakeBuBan104YkYtCommand( u_32 commid, u_char *buf, int len )
{
	// buf[0] --- 端口号(=commid)
	// buf[1]
	// buf[2]
	// buf[3]
	// buf[4] --- 控点号
	// buf[5]
	// buf[6]
	// buf[7]
	// buf[8] --- 操作类型(遥控:1=选择,2=执行,3=取消,7=直控; 
	//                     遥调:4=选择,5=执行,6=取消,8=急停)
	// buf[9] --- 控制状态(1=分到合，2=合到分)
	//                    (最高位为1时，为返校命令, 1=成功, 0=失败)
	// 在转发遥控数据点中，只保留了要转发的控点号，实际的端口号应该是该转发点的端口
	// 该转发点并没有指定虚拟的转发控点，则控点和转发点的点号一致。

	int		ykpoint, iLen;
    char	commandbuf[MAX_POLLCMD_BUF_LEN];
	static int iYkStatus = 0;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (pBUBAN104PORTPARAM)SioParam[commid].ExtInfo;
	
    memset( (char*)commandbuf, 0x00, MAX_POLLCMD_BUF_LEN );
    
	ykpoint = buf[4]+buf[5]*256+buf[6]*65536+buf[7]*16777216;
	ykpoint += pPortParam->iYkBaseAddr - 1;

	iLen = 9;
    switch(buf[8])
    {
        case 1:
        case 4:		// 选择
			commandbuf[0] = 0x68;
    	    commandbuf[1] = 14;
			switch(pPortParam->YkMode)
			{				
				case CONTROL_SINGAL:		// 单点控制
					commandbuf[6] = 45;
					break;
				case CONTROL_DOUBLE:		// 双点控制
				case CONTROL_DIRECT:		// 直接控制
					commandbuf[6] = 46;//(rtumsg->MsgData[3] == 1) ? 46 : 47;
					break;
			}
			commandbuf[7] = 1;
			commandbuf[8] = 6;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = (char)(ykpoint & 0x00ff);
				commandbuf[iLen++] = (char)((ykpoint & 0xff00)>>8);
			}
			else
			{
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				
				// wen 2002.11.18 字节顺序修改
				commandbuf[iLen++] = (char)(ykpoint & 0x00ff);
				commandbuf[iLen++] = (char)((ykpoint & 0xff00)>>8);
				commandbuf[iLen++] = 0;
			}
			
			if(buf[9] == 1)
			{
				if(CONTROL_SINGAL == pPortParam->YkMode)
				{
					iYkStatus = 1;
				}
				else
				{
					iYkStatus = 2;
				}
			}
			else
			{
				if(CONTROL_SINGAL == pPortParam->YkMode)
				{
					iYkStatus = 0;
				}
				else
				{
					iYkStatus = 1;
				}
			}
			commandbuf[iLen++] = (BYTE)(0xfc + iYkStatus);
			PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, (char *)commandbuf, iLen);
			break;
		
		case 2:
		case 5:         // 执行
			commandbuf[0] = 0x68;
    	    commandbuf[1] = 14;
			switch(pPortParam->YkMode)
			{				
				case CONTROL_SINGAL:		// 单点控制
					commandbuf[6] = 45;
					break;
				case CONTROL_DOUBLE:		// 双点控制
				case CONTROL_DIRECT:		// 直接控制
					commandbuf[6] = 46;//(rtumsg->MsgData[3] == 1) ? 46 : 47;
					break;
			}
			commandbuf[7] = 1;
			commandbuf[8] = 6;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				// wen 2002.11.18 字节顺序修改
				commandbuf[iLen++] = (char)(ykpoint & 0x00ff);
				commandbuf[iLen++] = (char)((ykpoint & 0xff00)>>8);
			}
			else
			{
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				
				// wen 2002.11.18 字节顺序修改
				commandbuf[iLen++] = (char)(ykpoint & 0x00ff);
				commandbuf[iLen++] = (char)((ykpoint & 0xff00)>>8);
				commandbuf[iLen++] = 0;
			}

			commandbuf[iLen++] = 0x7c + iYkStatus;
			PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, (char *)commandbuf, iLen);
			break;
    
		case 3:
		case 6:
			commandbuf[0] = 0x68;
    	    commandbuf[1] = 14;
			switch(pPortParam->YkMode)
			{				
				case CONTROL_SINGAL:		// 单点控制
					commandbuf[6] = 45;
					break;
				case CONTROL_DOUBLE:		// 双点控制
				case CONTROL_DIRECT:		// 直接控制
					commandbuf[6] = 46;//(rtumsg->MsgData[3] == 1) ? 46 : 47;
					break;
			}
			commandbuf[7] = 1;
			commandbuf[8] = 8;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				
				// wen 2002.11.18 字节顺序修改
				commandbuf[iLen++] = (char)(ykpoint & 0x00ff);
				commandbuf[iLen++] = (char)((ykpoint & 0xff00)>>8);
			}
			else
			{
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				
				// wen 2002.11.18 字节顺序修改
				commandbuf[iLen++] = (char)(ykpoint & 0x00ff);
				commandbuf[iLen++] = (char)((ykpoint & 0xff00)>>8);
				commandbuf[iLen++] = 0;
			}

			commandbuf[iLen++] = 0xfc + iYkStatus;
			PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, (char *)commandbuf, iLen);
			break;
	}

	if(ShmGetDispYkYtFlag())
	{
#ifdef _WIN32
		printf("TIP_(%04d): commid =%d ykytpnt=%d, op=%d checked.\n", 
			_getpid(), commid, ykpoint, (buf[9] & 0x7F));
#else
		printf("TIP_(%04d): commid =%d ykytpnt=%d, op=%d checked.\n",
			getpid(), commid, ykpoint, (buf[9] & 0x7F));
#endif
	}
}

//===================以下为POLLING规约常规函数接口======================
/*!
	\brief 寻找并生成下一条命令
	\param u_32 portno : RTU端口号
	\param i_32 iBuIdx : 间隔装置索引
*/
void Buban104FindNextCmd(int commid)
{
	int					i, iCurCmdIdx;
	BUBAN104PORTPARAM	*pPortParam;
	int		framename[BUBAN104_TIMER_CMD_NUM] = 
			{	
				ASK_PI, 
				ASK_ALL_DATA,
				FORMAT_S
			};

	if((commid < 0) || (commid >= GetMaxPort()))
	{
		return;
	}

	if(!ShmGetPortFlag(commid, FLAG_OPEN))
	{
		return;
	}

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(!pPortParam->LinkOk)
	{
		if(CheckPollCmdBufEmpty(commid) <= 0)
		{
			return;
		}

		MakeBuban104Command(commid, FORMAT_U_START_ACT);
		return;
	}

	for(i=0; i<BUBAN104_TIMER_CMD_NUM; i++)
	{
		if(pPortParam->CmdTime[i].CmdTimerConst )
			pPortParam->CmdTime[i].CmdTimerCnt++;
	}

	if(CheckPollCmdBufEmpty(commid) <= 0)
	{
		return;
	}
	
	iCurCmdIdx = pPortParam->CurCmdIdx;
	for ( i = 0; i < BUBAN104_TIMER_CMD_NUM; i++ )
	{
		if(!pPortParam->bAckRight)
		{
			break;
		}

		// wen 2005.09.16 在初始化不成功时，不生成轮询指令
		if(!pPortParam->Initdata)
		{
			break;
		}

		iCurCmdIdx = (iCurCmdIdx+1) % BUBAN104_TIMER_CMD_NUM;
		if ( (pPortParam->CmdTime[iCurCmdIdx].CmdTimerCnt 
				>= pPortParam->CmdTime[iCurCmdIdx].CmdTimerConst)				
				&& ( pPortParam->CmdTime[iCurCmdIdx].CmdTimerConst > 0 ))
			{
				pPortParam->CurCmdIdx = iCurCmdIdx;
				MakeBuban104Command(commid, framename[iCurCmdIdx]);
				pPortParam->CmdTime[iCurCmdIdx].CmdTimerCnt = 0;
				return;
			}
	}

	// wen (超时情况下)
	if(CheckPollCmdBufEmpty(commid) > 0)
	{
		if(pPortParam->lTimeOutCnt >= pPortParam->lTimeOutConst)
		{
			if(!pPortParam->bCloseSocket)
			{
				//++++++++++++++++++++++++++++++++++++++++++++++++++++++
				// wen 2005.10.28 修改超时时是否发送测试报文	
				//MakeBuban104Command(commid, FORMAT_S);
				//======================================================
				if(pPortParam->lTimeOutSendTest)
				{
					MakeBuban104Command(commid, FORMAT_U_TEST_ACT);
				}
				else
				{
					MakeBuban104Command(commid, FORMAT_S);
				}
				//++++++++++++++++++++++++++++++++++++++++++++++++++++++
				pPortParam->lTimeOutCnt = 0;
				pPortParam->bCloseSocket = TRUE;
			}
			else
			{
				InitBuban104CommandBuffer(commid);
				// 关闭网络端口
				Buban104CloseSocket(commid);
			}
		}
	}
}

void Buban104FindNextProvCmd(int commid)
{
	BUBAN104PORTPARAM	*pPortParam;
	
	if((commid < 0) || (commid >= GetMaxPort()))
	{
		return;
	}

	if(!ShmGetPortFlag(commid, FLAG_OPEN))
	{
		return;
	}

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(!pPortParam->LinkOk)
	{
		return;
	}

	if(CheckPollCmdBufEmpty(commid) <= 0)
	{
		return;
	}
	
	// wen (超时情况下)
	if(pPortParam->lTimeOutCnt >= pPortParam->lTimeOutConst)
	{
		if(!pPortParam->bCloseSocket)
		{
			if(pPortParam->bAckRight)
			{
				if(pPortParam->Initdata)
				{
					//++++++++++++++++++++++++++++++++++++++++++++++++++++++
					// wen 2006.03.23 修改超时时是否发送测试报文
					//MakeBuban104Command(commid, FORMAT_U_TEST_ACT);
					//======================================================
					if(pPortParam->lTimeOutSendTest)
					{
						;//MakeBuban104Command(commid, FORMAT_U_TEST_ACT);
					}
					//++++++++++++++++++++++++++++++++++++++++++++++++++++++
					pPortParam->lTimeOutCnt = 0;
					pPortParam->bCloseSocket = TRUE;
				}
			}
			else
			{
				InitBuban104CommandBuffer(commid);
				// 关闭网络端口
				Buban104CloseSocket(commid);
			}
		}
		else
		{
			InitBuban104CommandBuffer(commid);
			// 关闭网络端口
			Buban104CloseSocket(commid);
		}				
	}
	
	if(CheckPollCmdBufEmpty(commid) <= 0)
	{
		return;
	}

	if(pPortParam->bAckRight)
	{
		if(pPortParam->Initdata)
		{
			// 一类数据( 遥信变位 )
			//ProvBuban104SendClass1(commid);
			if(CheckPollCmdBufEmpty(commid) <= 0)
			{
				pPortParam->m_lNoDataCnt = 0;
				return;
			}

			// 转发soe数据
			//ProvBuban104SendSoe(commid);
			if(CheckPollCmdBufEmpty(commid) <= 0)
			{
				pPortParam->m_lNoDataCnt = 0;
				return;
			}

			// 二类数据( 遥测变化)
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
			// wen 2006.03.23 支持浮点数遥测的传送
			//ProvBuban104SendClass2(commid);
			//====================================================================
			/*if(pPortParam->m_bProvAiType == 13)
			{
				ProvBuban104SendClass2withFloat(commid);
			}
			else
			{
				ProvBuban104SendClass2(commid);
			}*/
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

			if(CheckPollCmdBufEmpty(commid) <= 0)
			{
				pPortParam->m_lNoDataCnt = 0;
				return;
			}

			//++++++++++++++++++++++++++++++++++++++++++++++++++++++
			// wen 2006.03.23 修改超时时是否发送测试报文
			//pPortParam->m_lNoDataCnt++;
			//if(pPortParam->m_lNoDataCnt >= pPortParam->lTimeOutConst)
			//{
			//	pPortParam->m_lNoDataCnt = 0;
			//	MakeBuban104Command(commid, FORMAT_U_TEST_ACT);
			//}
			//======================================================
			if(pPortParam->lTimeOutSendTest)
			{
				pPortParam->m_lNoDataCnt++;
				if(pPortParam->m_lNoDataCnt >= pPortParam->lTimeOutConst)
				{
					pPortParam->m_lNoDataCnt = 0;
					//MakeBuban104Command(commid, FORMAT_U_TEST_ACT);
				}
			}
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++
		}
	}
}

void Buban104SendCmdFormPollCmdBuf(int commid)
{
	BYTE				fcb = 0x20;
	BYTE				buf[MAX_MSG_BUF_SIZE];
	i_32				len;
	BUBAN104PORTPARAM	*pPortParam;

	if((commid < 0) || (commid >= GetMaxPort()))
	{
		return;
	}

	if(!ShmGetPortFlag(commid, FLAG_OPEN))
	{
		return;
	}

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(pPortParam->m_psBaoHu->ForceWaitFlag 
		&& pPortParam->m_psBaoHu->ForceWaitCnt)
	{
		pPortParam->m_psBaoHu->ForceWaitCnt--;
		if(pPortParam->m_psBaoHu->ForceWaitCnt == 0)
		{
			// 清除当前命令
			ClearCmdFormPollCmdBuf(commid);
			//ClearCmdAllFlag(commid);
		}
	}

	if(pPortParam->m_psBaoHu->SendCmdFlag 
		&& (pPortParam->m_psBaoHu->RevCmdFlag == 0))
    {
		pPortParam->m_psBaoHu->RetryTimeCnt++;
		if(pPortParam->m_psBaoHu->RetryTimeCnt < pPortParam->m_psBaoHu->RetryTime)
		{
			return;
		}

		pPortParam->m_psBaoHu->RetryTimeCnt = 0;

		pPortParam->m_psBaoHu->RetryCnt++;
		if(pPortParam->m_psBaoHu->RetryCnt > pPortParam->m_psBaoHu->Retry)
		{
			// 清除当前命令
			ClearCmdFormPollCmdBuf(commid);
			//ClearCmdAllFlag(commid);
		}
		else
		{
			pPortParam->m_psBaoHu->SendCmdFlag = 0;
			pPortParam->m_psBaoHu->RevCmdFlag = 0;
			pPortParam->m_psBaoHu->ReSendCmdFlag = 1;
		}
	}

	if(pPortParam->m_psBaoHu->SendCmdFlag 
		&& pPortParam->m_psBaoHu->RevCmdFlag)
	{
		// 清除当前命令
		ClearCmdFormPollCmdBuf(commid);
		//ClearCmdAllFlag(commid);
		if(pPortParam->bSendFormatI)
		{
			//pPortParam->wSendSequence++;
			//pPortParam->wSendSequence %= MAX_SEQUENCE;
			pPortParam->bSendFormatI = FALSE;
		}
	}

	if(pPortParam->m_psBaoHu->WaitTime)
	{
		pPortParam->m_psBaoHu->WaitTimeCnt++;
		if(pPortParam->m_psBaoHu->WaitTimeCnt 
			< pPortParam->m_psBaoHu->WaitTime)
		{
			return;
		}
	}
	pPortParam->m_psBaoHu->WaitTimeCnt = 0;

	if(pPortParam->m_psBaoHu->ReSendCmdFlag)
	{
		len = ReGetCmdFormPollCmdBuf(commid, buf, sizeof(buf));
	}
	else
	{
		len = GetCmdFormPollCmdBuf(commid, buf, sizeof(buf));
		// 清除标识已经在前面 ClearCmdAllFlag(commid)动作中完成
		//pPortParam->m_psBaoHu->RetryCnt = 0;
	}

	if(len < 3)
	{
		return;
	}

#ifdef _WIN32
	if(isUdpSocketExist() == TRUE)
#endif
	{
		if(buf[4] & 0x01 )
		{
			// format_s
			if((buf[4] & 0x02) == 0 )		
			{
				buf[6] = LOBYTE(pPortParam->wRecvSequence << 1);
				buf[7] = HIBYTE(pPortParam->wRecvSequence << 1);
			}
			// else format_u
		}
		// format_i
		else
		{
			buf[4] = LOBYTE(pPortParam->wSendSequence << 1);
			buf[5] = HIBYTE(pPortParam->wSendSequence << 1);
			buf[6] = LOBYTE(pPortParam->wRecvSequence << 1);
			buf[7] = HIBYTE(pPortParam->wRecvSequence << 1);
			pPortParam->bSendFormatI = TRUE;
		    //4.bug_1.2.3_20060807_3/bug_2.0.1_20060807_4 104规约不能转发第二个端口的遥测数据
			//发送数据后应当立即将发送序号＋1，而不应当在清除命令时＋1
			pPortParam->wSendSequence++;
			pPortParam->wSendSequence %= MAX_SEQUENCE;
		}

		SendDataToPort(commid, (char *)&buf[2], len-2);
	
		pPortParam->m_psBaoHu->SendCmdFlag = 1;
		pPortParam->m_psBaoHu->ReSendCmdFlag = 0;
		pPortParam->m_psBaoHu->RevCmdFlag = 0;
		pPortParam->m_psBaoHu->RetryTimeCnt = 0;
	}

#ifndef _WIN32
	if(pPortParam->m_psBaoHu->LastGetCmdBuf == FAST_CMD_TYPE) 
#else
	if((pPortParam->m_psBaoHu->LastGetCmdBuf == FAST_CMD_TYPE) 
		|| !isUdpSocketExist()) 
#endif
	{
		pPortParam->m_psBaoHu->ForceWaitCnt = BYTE1(buf[0])+BYTE0(buf[1])+TIMER_CNT-1;
		pPortParam->m_psBaoHu->ForceWaitCnt /= TIMER_CNT;
		if(pPortParam->m_psBaoHu->ForceWaitCnt)
		{
			pPortParam->m_psBaoHu->ForceWaitFlag = 1;
		}
		else
		{
			ClearCmdFormPollCmdBuf(commid);		// 清除当前命令
			//ClearCmdAllFlag(commid);			// 清除当前命令
			if(pPortParam->bSendFormatI)
			{
				//pPortParam->wSendSequence++;
				//pPortParam->wSendSequence %= MAX_SEQUENCE;
				pPortParam->bSendFormatI = FALSE;
			}
		}
	}
}
//===========================指令生成函数结束=========================

//===========================以下为数据处理函数=======================
void Buban104ProcessData(u_32 commid, BUBAN104PORTPARAM *psPortParam, BOOL bProcess)
{
	RTUMSG				msg;
	BUBAN104PORTPARAM	*pPortParam;
	
	pPortParam = psPortParam;

	if(TRUE == bProcess)
	{
		msg.PortIdx = (BYTE)commid;
		msg.MsgLen = psPortParam->m_iRecvLen;
		memcpy(msg.MsgData, psPortParam->m_au8RecvBuf, msg.MsgLen);
		msg.MsgData[msg.MsgLen] = CHECK_WHOLE;
		msg.MsgData[msg.MsgLen+1] = 0;

		// 超时计数清零
		pPortParam->lTimeOutCnt = 0;
		pPortParam->bCloseSocket = FALSE;

		// 子站数据处理
		if(PROTOCOL_SLAVE == pPortParam->m_psBaoHu->PortType)
		{
			ProvBuban104dataProcess(commid, &msg);
			return;
		}

		// format-i
		if((msg.MsgData[2] & 0x01) == 0)
		{
			Buban104FormatI(&msg);
		}
		// format-s,format-u
		else
		{
			// format-u
			if((msg.MsgData[2] & 0x02) != 0 )
			{
				Buban104FormatU(&msg);
			}
			// format-s( 主站不会收到's'帧格式)
			//else Buban104FormatS(&msg);
		}
	}
}

//***************************************************************
//*				I帧数据的处理程序
//*参数 RTUMSG* rtumsg:接收到的数据信息
//***************************************************************
void Buban104FormatI(RTUMSG *rtumsg)
{	
	int					commid, iSequenceInc;
	BUBAN104PORTPARAM	*pPortParam;
#ifdef _DEBUG_MSG_
	char szbuf[256];
#endif
	
	// length
	if(rtumsg->MsgData[1] < 4)
	{
		return;
	}

	commid = rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	pPortParam->wAckSequence = (rtumsg->MsgData[4]+(rtumsg->MsgData[5] << 8)) >> 1;
	
	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++//
	// wen 2005.09.19 帧序匹配算法修改
	/*
	if(pPortParam->wSendSequence != pPortParam->wAckSequence )
	{
		pPortParam->bAckRight = FALSE;
	}
	//??? WEN 2002.09.17 WHY
	else
	{
		pPortParam->bAckRight = TRUE;
	}
	*/

	iSequenceInc = pPortParam->wSendSequence - pPortParam->wAckSequence;
	if(iSequenceInc < 0)
	{
		iSequenceInc += MAX_SEQUENCE;
	}
	//不大于帧序应答尺寸(缺省值=MAX_FRAMEMATCHING_SIZE)
	if((pPortParam->wSendSequence != pPortParam->wAckSequence )
		&& (iSequenceInc > pPortParam->m_iFrameSize))
	{
		pPortParam->bAckRight = FALSE;
	}
	//??? WEN 2002.09.17 WHY
	else
	{
		pPortParam->bAckRight = TRUE;
	}
	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++//

	pPortParam->wRecvSequence = (rtumsg->MsgData[2]+(rtumsg->MsgData[3] << 8)) >> 1;
	pPortParam->wRecvSequence += 1;
	pPortParam->wRecvSequence %= MAX_SEQUENCE;
    
	switch (rtumsg->MsgData[6])
    {
		case 1:		// 单点遥信处理
			Buban104DiDataProcess( rtumsg, 0 );
			// wen 2004.09.02 修改为对于遥信变位和soe数据帧确认,以使对方能确认数据收到(拓邦公司用)
			MakeBuban104Command(commid, FORMAT_S );
			break;

		case 2:		// 单点遥信SOE处理
			Buban104SoeDataProcess( rtumsg, 0 );
			// wen 2004.09.02 修改为对于遥信变位和soe数据帧确认,以使对方能确认数据收到(拓邦公司用)
			MakeBuban104Command(commid, FORMAT_S);
			break;

		case 3:		// 双点遥信处理
			Buban104DiDataProcess( rtumsg, 1 );
			// wen 2004.09.02 修改为对于遥信变位和soe数据帧确认,以使对方能确认数据收到(拓邦公司用)
			MakeBuban104Command(commid, FORMAT_S);
			break;

		case 4:		// 双点遥信SOE处理
			Buban104SoeDataProcess( rtumsg, 1 );
			// wen 2004.09.02 修改为对于遥信变位和soe数据帧确认,以使对方能确认数据收到(拓邦公司用)
			MakeBuban104Command(commid, FORMAT_S);
			break;

		case 5:		// 变压器分接头位置
			break;
		case 6:		// 变压器分接头位置带时标
			break;
		case 7:		// 子站远动终端状态 
			break;

		case 9:		// 带品质无时标遥测
			Buban104AiWithPzDataProcess( rtumsg, 0 );
			break;

		case 10:	// 带品质带时标遥测
			Buban104AiWithPzDataProcess( rtumsg, 1 );
			break;

		case 13:
			Buban104AllFloatAiDataProcess( rtumsg );
			break;

		case 20:	// 子站传送遥信变位帧
			Buban104AutoSendDiProcess( rtumsg );
			break;

		case 21:	// 全遥测数据处理 或变化数据
			Buban104AllAiDataProcess( rtumsg );
			break;
			
		case 15:	// 不带时标电度
			Buban104PiDataProcess( rtumsg );
			break;
		case 16:	// 带时标电度
			Buban104PiWithTimeDataProcess( rtumsg );
			break;

		case 17:	// 继电保护装置单个事件顺序记录帧
		case 18:	// 继电保护装置成组记录启动事件顺序
		case 19:	// 继电保护装置成组输出电路的事件顺序记录
			Buban104BaoHuDataProcess( rtumsg );
			break;

		// wen 2004.05.27 华东104规约修改点(???)
		case 30:    // 带CP56Time2a时标的单点信息   M_SP_TB_1
			Buban104SoeDataProcessWithCP56Time2a( rtumsg, 0 );
			// wen 2004.09.02 修改为对于遥信变位和soe数据帧确认,以使对方能确认数据收到(拓邦公司用)
			MakeBuban104Command( commid, FORMAT_S );
			break;
		case 31:    // 带CP56Time2a时标的双点信息   M_DP_TB_1
			Buban104SoeDataProcessWithCP56Time2a( rtumsg, 1 );
			// wen 2004.09.02 修改为对于遥信变位和soe数据帧确认,以使对方能确认数据收到(拓邦公司用)
			MakeBuban104Command( commid, FORMAT_S );
			break;
		case 32:    // 带CP56Time2a时标的步位置信息 M_ST_TB_1
			break;
		case 33:    // 带CP56Time2a时标的32比特串   M_BO_TB_1
			break;
		case 34:    // 带CP56Time2a时标的测量值, 规一化值 M_ME_TD_1  
			Buban104AiWithDataProcessWithM_ME_TD_1( rtumsg );
			break;
		case 35:    // 带CP56Time2a时标的测量值, 标度化值 M_ME_TE_1
			Buban104AiWithDataProcessWithM_ME_TE_1( rtumsg );
			break;
		case 36:    // 带CP56Time2a时标的测量值, 短浮点数 M_ME_TF_1
			Buban104AiWithDataProcessWithM_ME_TF_1( rtumsg );
			break;
		case 37:    // 带CP56Time2a时标的累计量     M_IT_TB_1
			Buban104PiWithTimeDataProcessWithM_IT_TB_1( rtumsg );
			break;
		case 38:    // 带CP56Time2a时标的继电保护装置事件 M_EP_TD_1
			break;
		case 39:    // 带CP56Time2a时标的继电保护装置成组启动事件 M_EP_TE_1
			break;
		case 40:    // 带CP56Time2a时标的继电保拌装置成组输出电路信息M_EP_TF_1
			break;

		case 45:
		case 46:	// 遥控返校
		case 47:	// 遥调返校
			Buban104YkYtAck( rtumsg );
			break;
		case 48:	// 设定确认
			Buban104SetAck( rtumsg );
			break;
		case 100:	// 总召唤确认
			Buban104InitdataProecss( rtumsg );
			break;

		case 101:	// 电度结束帧
			Buban104PidataEnd( rtumsg );
			break;
		case 103:	// 时间同步确认帧
			Buban104SynTime( rtumsg );
			break;

		default:
#ifdef _DEBUG_MSG_
			DebugPrint("接收到不认识的命令，请检查程序.\n");
#endif
			break;
	}
}

void Buban104FormatU(RTUMSG *rtumsg)
{
	int					commid;
	BUBAN104PORTPARAM	*pPortParam;
	
	// length
	if(rtumsg->MsgData[1] < 4)
	{
		return;
	}

	commid = rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	switch(rtumsg->MsgData[2] & 0xfc)
	{
		case 0x08:	// 启动动作响应
			InitBuban104CommandBuffer(commid);
			pPortParam->bAckRight = TRUE;
			pPortParam->LinkOk = TRUE;			
			break;
		case 0x20:	// 停止动作响应
			pPortParam->bAckRight = TRUE;
			break;
		case 0x40:	// 测试动作
			//pPortParam->bAckRight = TRUE;
			MakeBuban104Command(commid, FORMAT_U_TEST_CON);
			if( !pPortParam->bAckRight )
			{
				pPortParam->bAckRight = TRUE;
				pPortParam->wSendSequence = pPortParam->wAckSequence;
			}
			break;
		// wen 2005.11.02 增加测试响应处理
		case 0x80:	// 测试响应
			if(!pPortParam->bAckRight)
			{
				pPortParam->bAckRight = TRUE;
			}
			break;
		default:	// 错误的响应
			pPortParam->bAckRight = FALSE;
			break;
	}
}

/* Buban104 初始化数据处理 */
void Buban104InitdataProecss(RTUMSG * rtumsg)
{
	int					commid;
	WORD				wTransCause;
	BUBAN104PORTPARAM	*pPortParam;
	
	commid = rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		wTransCause = rtumsg->MsgData[8];
	}
	else
	{
		wTransCause = rtumsg->MsgData[8] + (rtumsg->MsgData[9] << 8);
	}
	switch(wTransCause)
	{
		case 7:
		case 9://总召唤确认			
			break;

		case 10://总召唤结束
			pPortParam->Initdata = TRUE;
			break;
	}
}

/* 电度结束帧 */
void Buban104PidataEnd(RTUMSG * rtumsg)
{
	int					commid;
	WORD				wTransCause;
	BUBAN104PORTPARAM	*pPortParam;
	
	commid = rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		wTransCause = rtumsg->MsgData[8];
	}
	else
	{
		wTransCause = rtumsg->MsgData[8] + (rtumsg->MsgData[9] << 8);
	}

	if(wTransCause & 0x0040)
	{		
		pPortParam->Initdata = TRUE;
		return;
	}

	switch(wTransCause)
	{
		case 7://总召唤确认
			break;

		case 10://电度召唤结束
			pPortParam->Initdata = TRUE;
			break;
	}
}

//设定确认
void Buban104SetAck( RTUMSG *rtumsg)
{

}

//Buban104 遥控遥调返校程序
void Buban104YkYtAck(RTUMSG * rtumsg)
{
	int					commid;
	BYTE				bYkOperate;
	WORD				wTransCause;
	YKYT_PARAM			YkYtParam;
	BUBAN104PORTPARAM	*pPortParam;
	
	commid = rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		YkYtParam.m_iYkYtPnt = (rtumsg->MsgData[11]<<8) + rtumsg->MsgData[10];
		//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
		// wen 2006.03.24 
		//YkYtParam.m_iYkYtPnt -= pPortParam->iYkBaseAddr;
		//=======================================================================
		YkYtParam.m_iYkYtPnt -= (pPortParam->iYkBaseAddr-1);
		//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
		YkYtParam.m_iYkYtPnt %= 256;

		wTransCause = rtumsg->MsgData[8];
		bYkOperate = rtumsg->MsgData[12];
	}
	else
	{
		YkYtParam.m_iYkYtPnt = (rtumsg->MsgData[14] << 16) 
			+ (rtumsg->MsgData[13]<<8) + rtumsg->MsgData[12];
		//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
		// wen 2006.03.24 
		//YkYtParam.m_iYkYtPnt -= pPortParam->iYkBaseAddr;
		//=======================================================================
		YkYtParam.m_iYkYtPnt -= (pPortParam->iYkBaseAddr-1);
		//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
		YkYtParam.m_iYkYtPnt %= 256;

		wTransCause = (rtumsg->MsgData[9]<<8) + rtumsg->MsgData[8];
		bYkOperate = rtumsg->MsgData[15];
	}
	
	if(bYkOperate & 0x80) //选择返校
	{
		YkYtParam.m_iYkYtStep = STEP_YKYT_SELECT;

		//此位为肯定或否定确认位 || 撤销确认
		if((wTransCause & 0x0040) || (wTransCause == 0x0009))
		{
			YkYtParam.m_iYkYtOperate = 3;
		}
		else if(wTransCause == 0x0007)
		{
			if(rtumsg->MsgData[6] != 45)
			{
				switch(bYkOperate & 0x03)
				{
					case 1://控分
						if(pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate == 2)
						{
							YkYtParam.m_iYkYtOperate = pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate;
						}
						else
						{
							YkYtParam.m_iYkYtOperate = 3;
						}
						break;
					case 2://控合
						if(pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate == 1)
						{
							YkYtParam.m_iYkYtOperate = pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate;
						}
						else
						{
							YkYtParam.m_iYkYtOperate = 3;
						}
						break;
					default:
						YkYtParam.m_iYkYtOperate = 3;
						break;
				}
			}
			else
			{
				// 控合
				if( bYkOperate & 0x01 )
				{					
					if(pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate == 1)
					{
						YkYtParam.m_iYkYtOperate = pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate;
					}
					else
					{
						YkYtParam.m_iYkYtOperate = 3;
					}
				}
				// 控分
				else
				{
					if(pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate == 2)
					{
						YkYtParam.m_iYkYtOperate = pPortParam->m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate;
					}
					else
					{
						YkYtParam.m_iYkYtOperate = 3;
					}
				}
			}
		}

		YkYtParam.m_iYkYtUpDown = YKYT_SEND_UP;
		SendYkYtCommand2(commid, &YkYtParam);
	}
	else //执行并完成
	{		
		//此位为肯定或否定确认位
		if((wTransCause & 0x0040) == 0)
		{			
			switch(wTransCause)
			{
				case 0x0007://执行确认
					break;
				case 0x000a://执行完成
					break;
				default:
					break;
			}
		}
	}
}

/* Buban104 对时程序 */
void Buban104SynTime(RTUMSG * rtumsg)
{
	int					commid;
	WORD				wTransCause;
	DAY_TIME			stime;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(1 != pPortParam->m_psBaoHu->CheckTime)
	{
		return;
	}
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		wTransCause = rtumsg->MsgData[8];
	}
	else
	{
		wTransCause = rtumsg->MsgData[8] + (rtumsg->MsgData[9]<<8);
	}
	
	if(wTransCause != 0x0007)
	{
		return;
	}

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		stime.mSec = (rtumsg->MsgData[13]<<8) + rtumsg->MsgData[12];
		stime.Sec  = stime.mSec / 1000;
		stime.mSec %= 1000;
		stime.Min  = rtumsg->MsgData[14] & 0x3F;
		stime.Hour = rtumsg->MsgData[15] & 0x1F;
		stime.Day  = rtumsg->MsgData[16] & 0x1F;
		stime.Month= rtumsg->MsgData[17] & 0x0F;
		stime.Year = (rtumsg->MsgData[18] & 0x7F)+2000;
	}
	else
	{
		stime.mSec = (rtumsg->MsgData[16]<<8) + rtumsg->MsgData[15];
		stime.Sec  = stime.mSec / 1000;
		stime.mSec %= 1000;
		stime.Min  = rtumsg->MsgData[17] & 0x3F;
		stime.Hour = rtumsg->MsgData[18] & 0x1F;
		stime.Day  = rtumsg->MsgData[19] & 0x1F;
		stime.Month= rtumsg->MsgData[20] & 0x0F;
		stime.Year = (rtumsg->MsgData[21] & 0x7F)+2000;
	}
	SetLocalTimeEx(&stime);
}

/* 子站主动传送遥信变位帧 */
void Buban104AutoSendDiProcess(RTUMSG *rtumsg)
{
	int			i, j, dipnt, len, istart;
	DI_DEF		pntmsg;
	WORD		wStatus, wStatusBit, wTransCause;
	
	int					commid;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		wTransCause = rtumsg->MsgData[8];
		istart = 10;
	}
	else
	{
		wTransCause = rtumsg->MsgData[8] + (rtumsg->MsgData[9]<<8);
		istart = 12;
	}

	if(wTransCause == 0x0003)
	{
		for(i = istart; i < (2 + len); )
		{
			dipnt = rtumsg->MsgData[i++];
			dipnt += (rtumsg->MsgData[i++]<<8);
			if(VER_IEC870_5_104 == pPortParam->RtuVersion)
			{
				dipnt += (rtumsg->MsgData[i++]<<16);
			}
			dipnt -= pPortParam->iDiBaseAddr;
			
			wStatus = rtumsg->MsgData[i++];
			wStatus = (wStatus<<8) + rtumsg->MsgData[i++];
			wStatusBit = rtumsg->MsgData[i++];
			wStatusBit = (wStatusBit<<8) + rtumsg->MsgData[i++];

			for( j = 0; j < 16; j++ )
			{
				if( wStatusBit & (0x0001 << j) )
				{
					if( wStatus & (0x0001 << j) )
						pntmsg.Status = 1;
					else
						pntmsg.Status = 0;
					SetPntMsg(commid, dipnt+j, (void *)&pntmsg, DI_PNT_TYPE, PNT_STATUS);
				}
			}
		}
	}
}

// Buban104 带品质描述的遥测数据处理
void Buban104AiWithPzDataProcess(RTUMSG * rtumsg, int flag)
{
	int					i, aipnt, len;
	AI_DEF				pntmsg;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
	}
	else
	{
		istart = 12;
	}
	
	//处理变化遥测
	for(i = istart; i < (2 + len);)
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}
		aipnt -= pPortParam->iAiBaseAddr;

		pntmsg.RawValue = (short)(rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8));
		// 品质描述
		// rtumsg->MsgData[i+2];
		i += 3;
			
		SetPntMsg(commid, aipnt, (void *)&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
			
		// 时标
		if(flag)
		{
			i += 3;
		}
	}
}

void Buban104AllAiDataProcess(RTUMSG *rtumsg)
{
	int					i, aipnt, len;
	AI_DEF				pntmsg;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(len <= 0)
	{
		return;
	}

	aipnt = 0;
	//处理变化遥测
	if((rtumsg->MsgData[7] & 0x80)==0)
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			istart = 10;
		}
		else
		{
			istart = 12;
		}

		for(i = istart; i < len + 2;)
		{
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
				i += 2;
			}
			else
			{
				aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
				i += 3;
			}

			aipnt -= pPortParam->iAiBaseAddr;
			
			pntmsg.RawValue = (short)((rtumsg->MsgData[i+1]<<8) + rtumsg->MsgData[i]);
			i += 2;

			SetPntMsg(commid, aipnt, (void *)&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
		}
		return;
	}
	
	//处理全遥测
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 12;
		aipnt = rtumsg->MsgData[10]+(rtumsg->MsgData[11]<<8);
	}
	else
	{
		istart = 15;
		aipnt = rtumsg->MsgData[12]+(rtumsg->MsgData[13]<<8)+(rtumsg->MsgData[14]<<16);	
	}
	aipnt -= pPortParam->iAiBaseAddr;
	
	for(i=istart; i < (len+2); i+=2)
	{
		pntmsg.RawValue = (short)(rtumsg->MsgData[i] + (rtumsg->MsgData[i+1]<<8));
		SetPntMsg(commid, aipnt, (void *)&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
		aipnt++;
	}
}

void Buban104AllFloatAiDataProcess(RTUMSG *rtumsg)
{
	int					i, aipnt, len;
	float				fValue;
	AI_DEF				pntmsg;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(len <= 0)
	{
		return;
	}

	aipnt = 0;
	//处理变化遥测
	if((rtumsg->MsgData[7] & 0x80)==0)
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			istart = 10;
		}
		else
		{
			istart = 12;
		}

		for(i = istart; i < len + 4;)
		{
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
				i += 2;
			}
			else
			{
				aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
				i += 3;
			}

			aipnt -= pPortParam->iAiBaseAddr;
			
			fValue = SequenceRtuToHostfloat((*((float *)&rtumsg->MsgData[i])));
			pntmsg.RawValue = (unsigned long)fValue;
			// 含有一个字节的品质描述
			i += sizeof(float)+1;

			SetPntMsg(commid, aipnt, (void *)&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
		}
		return;
	}
	
	//处理全遥测
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 12;
		aipnt = rtumsg->MsgData[10]+(rtumsg->MsgData[11]<<8);
	}
	else
	{
		istart = 15;
		aipnt = rtumsg->MsgData[12]+(rtumsg->MsgData[13]<<8)+(rtumsg->MsgData[14]<<16);	
	}
	aipnt -= pPortParam->iAiBaseAddr;
	
	for(i=istart; i < (len+2); i+=5)
	{
		fValue = SequenceRtuToHostfloat((*((float *)&rtumsg->MsgData[i])));
		pntmsg.RawValue = (unsigned long)fValue;
		SetPntMsg(commid, aipnt, (void *)&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
		aipnt++;
	}
}

void Buban104DiDataProcess(RTUMSG *rtumsg, int flag)
{
	int					i, dipnt, len;
	DI_DEF				pntmsg;
	WORD				wTransCause;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		wTransCause = rtumsg->MsgData[8];
	}
	else
	{
		wTransCause = rtumsg->MsgData[8] + (rtumsg->MsgData[9]<<8);
	}

	//从站主动上发 变化遥信
	if(wTransCause == 0x0003)
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			istart = 10;
		}
		else
		{
			istart = 12;
		}
		for ( i = istart; i < 2 + len; )
		{
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				dipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
				i += 2;
			}
			else
			{
				dipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
				i += 3;
			}
			dipnt -= pPortParam->iDiBaseAddr;

			if ( flag == 0 )
				pntmsg.Status = rtumsg->MsgData[i++] & 0x1;
			else
			{
				switch ( rtumsg->MsgData[i++] & 0x3 )
				{
					 case 1:
						pntmsg.Status = 1;
						break;
					 case 2:
						pntmsg.Status = 0;
						break;
					 default:
						pntmsg.Status = 0xff;
						break;
				}
			}
			if ( pntmsg.Status != 0xff )
			{
				SetPntMsg(commid, dipnt, (void *)&pntmsg, DI_PNT_TYPE, PNT_STATUS);
			}
		}

		return;
	}

	if(rtumsg->MsgData[7] & 0x80)
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			istart = 12;
			dipnt = rtumsg->MsgData[10]+(rtumsg->MsgData[11]<<8);
		}
		else
		{
			istart = 15;
			dipnt = rtumsg->MsgData[12]+(rtumsg->MsgData[13]<<8)+(rtumsg->MsgData[14]<<16);
		}
		dipnt -= pPortParam->iDiBaseAddr;
		
		for ( i = istart; i < 2 + len; i++,dipnt++ )
		{
			if ( flag == 0 )
				pntmsg.Status = rtumsg->MsgData[i] & 0x1;
			else
			{
				switch ( rtumsg->MsgData[i] & 0x3 )
				{
					 case 1:
						pntmsg.Status = 1;
						break;
					 case 2:
						pntmsg.Status = 0;
						break;
					 default:
						pntmsg.Status = 0xff;
						break;
				}
			}
			if(pntmsg.Status != 0xff)
			{
				SetPntMsg(commid, dipnt, (void *)&pntmsg, DI_PNT_TYPE, PNT_STATUS);
			}
		}
	}
	else
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			istart = 10;
		}
		else
		{
			istart = 12;
		}
		for ( i = istart; i < 2 + len; )
		{
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				dipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
				i += 2;
			}
			else
			{
				dipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
				i += 3;
			}
			dipnt -= pPortParam->iDiBaseAddr;
			
			if ( flag == 0 )
				pntmsg.Status = rtumsg->MsgData[i++] & 0x1;
			else
			{
				switch ( rtumsg->MsgData[i++] & 0x3 )
				{
					 case 1:
						pntmsg.Status = 1;
						break;
					 case 2:
						pntmsg.Status = 0;
						break;
					 default:
						pntmsg.Status = 0xff;
						break;
				}
			}
			if(pntmsg.Status != 0xff)
			{
				SetPntMsg(commid, dipnt, (void *)&pntmsg, DI_PNT_TYPE, PNT_STATUS);
			}
		}
	}
}

void Buban104SoeDataProcess(RTUMSG *rtumsg, int flag)
{
	_int64				i64Millseconds;
	time_t				iTime;
	int					i, pnt, len;
    char 				st;
	int					sec;
	DI_DEF				pntmsg;
	DAY_TIME			sm;
	struct				tm *testtm;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
	}
	else
	{
		istart = 12;
	}
	for ( i = istart; i < len + 2;)
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			pnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			pnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}
		pnt -= pPortParam->iDiBaseAddr;
		
		if ( flag == 0 )
			st = rtumsg->MsgData[i++] & 0x01;
		else
		{
			switch ( rtumsg->MsgData[i++] & 0x3 )
			{
				 case 1:
					st = 1;
					break;
				 case 2:
					st = 0;
					break;
				 default:
					st = 0x0f;
					break;
			}
		}
		if ( st == 0x0f )
			continue;

		sec = rtumsg->MsgData[i] + ( rtumsg->MsgData[i+1] << 8 );
		pntmsg.SoeTime.mSec = sec % 1000;
		pntmsg.SoeTime.Sec = sec / 1000;
		pntmsg.SoeTime.Min = (rtumsg->MsgData[i+2] & 0x3f);	// 分
		i += 3;
		GetLocalTimeEx(&sm);
		if(abs(pntmsg.SoeTime.Min-sm.Min) > 50)
		{
			i64Millseconds = SystemTimeToMillseconds(&sm, 0);
			if(i64Millseconds > 0)
			{
				// 减去一小时
				iTime = (long)(i64Millseconds/1000) - 3600;
				testtm = localtime(&iTime);
				sm.Year = testtm->tm_year + 1900;
				sm.Month = testtm->tm_mon + 1;
				sm.Day = testtm->tm_mday;
				sm.Hour = testtm->tm_hour;
				sm.Min = testtm->tm_min;
				sm.Sec = testtm->tm_sec;
			}
		}
		
		pntmsg.SoeTime.Hour = sm.Hour;
		pntmsg.SoeTime.Day = sm.Day;
		pntmsg.SoeTime.Month = sm.Month;
		pntmsg.SoeTime.Year = sm.Year;
		pntmsg.Status = st;

		SetPntMsg(commid, pnt, (void *)&pntmsg, DI_PNT_TYPE, PNT_SOE_TIME);
	}
}

void Buban104PiDataProcess( RTUMSG * rtumsg )
{
	int					i, point, len;
	PI_DEF				pntmsg;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	len = (int)rtumsg->MsgData[1];
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
	}
	else
	{
		istart = 12;
	}
	for ( i = istart; i < 2 + len; )
    {
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			point = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			point = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}
		point -= pPortParam->iPiBaseAddr;

		pntmsg.RawValue = (rtumsg->MsgData[i+3]<<24) + (rtumsg->MsgData[i+2]<<16) 
					+ (rtumsg->MsgData[i+1]<<8) + rtumsg->MsgData[i];
		//rtumsg->MsgData[i+4]; // 顺序记号
		i += 5;
		
		SetPntMsg(commid, point, (void *)&pntmsg, PI_PNT_TYPE, PNT_RAWVALUE);
    }
}

void Buban104PiWithTimeDataProcess( RTUMSG *rtumsg )
{
	int					i, point, len;
	PI_DEF				pntmsg;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
	}
	else
	{
		istart = 12;
	}
	for ( i = istart; i < 2 + len; )
    {
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			point = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			point = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}

		point -= pPortParam->iPiBaseAddr;

		pntmsg.RawValue = (rtumsg->MsgData[i+3]<<24) + (rtumsg->MsgData[i+2]<<16) 
			+ (rtumsg->MsgData[i+1]<<8) + rtumsg->MsgData[i];
		//rtumsg->MsgData[i+4]; // 顺序记号
		// 3bytes 时间
		i += 8;

		SetPntMsg(commid, point, (void *)&pntmsg, PI_PNT_TYPE, PNT_RAWVALUE);
    }
}

void Buban104BaoHuDataProcess( RTUMSG *rtumsg )
{
	// 该功能不做处理
}

void Buban104DefaultBaoHuDataProcess( RTUMSG *rtumsg )
{
	// 该功能不做处理
}

// 新增函数，含有 7 BYTE 的时标
//***************************************************************
//*				 Buban104 SOE 数据处理(7 bytes 时间)           	*
//***************************************************************
void Buban104SoeDataProcessWithCP56Time2a( RTUMSG *rtumsg, int flag )
{
	_int64				i64Millseconds;
	time_t				iTime;
	int					i, pnt, len;
    char 				st;
	int					sec;
	DI_DEF				pntmsg;
	DAY_TIME			sm;
	struct				tm *testtm;
	int					commid, istart;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
	}
	else
	{
		istart = 12;
	}
	for ( i = istart; i < len + 2; )
	{
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			pnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			pnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}
		pnt -= pPortParam->iDiBaseAddr;
		
		if(flag == 0)
		{
			st = rtumsg->MsgData[i++] & 0x01;
		}
		else
		{
			switch ( rtumsg->MsgData[i++] & 0x3 )
			{
				 case 1:
					st = 1;
					break;
				 case 2:
					st = 0;
					break;
				 default:
					st = 0x0f;
					break;
			}
		}
		if(st == 0x0f)
		{
			continue;
		}

		sec = rtumsg->MsgData[i] + (rtumsg->MsgData[i+1] << 8);
		pntmsg.SoeTime.mSec = sec % 1000;
		pntmsg.SoeTime.Sec = sec / 1000;
		pntmsg.SoeTime.Min = (char)(rtumsg->MsgData[i+2] & 0x3f);
		pntmsg.SoeTime.Hour = (char)(rtumsg->MsgData[i+3] & 0x1f);
		pntmsg.SoeTime.Day = (char)(rtumsg->MsgData[i+4] & 0x1f);
		//rtumsg->MsgData[i+5]; // month
		//rtumsg->MsgData[i+6]; // year
		i += 7;

		GetLocalTimeEx(&sm);
		if((pntmsg.SoeTime.Day-sm.Day) < 0)
		{
			i64Millseconds = SystemTimeToMillseconds(&sm, 0);
			if(i64Millseconds > 0)
			{
				// 减去一小时
				iTime = (long)(i64Millseconds/1000) - 3600;
				testtm = localtime(&iTime);
				sm.Year = testtm->tm_year + 1900;
				sm.Month = testtm->tm_mon + 1;
				sm.Day = testtm->tm_mday;
				sm.Hour = testtm->tm_hour;
				sm.Min = testtm->tm_min;
				sm.Sec = testtm->tm_sec;
			}
		}

		pntmsg.SoeTime.Month = sm.Month;
		pntmsg.SoeTime.Year = sm.Year;
		pntmsg.Status = st;
		SetPntMsg(commid, pnt, (void *)&pntmsg, DI_PNT_TYPE, PNT_SOE_TIME);
	}
}

void Buban104AiWithDataProcessWithM_ME_TD_1(RTUMSG * rtumsg)
{
	int					i, aipnt, len;
	AI_DEF				pntmsg;
	char				szbuf[256];
	int					commid, istart, istep;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
		istep = 11;
	}
	else
	{
		istart = 12;
		istep = 12;
	}
	//处理变化遥测
	for ( i = istart; i < 2 + len; )
	{
		if( ( i + istep ) > (2 + len))
		{
#ifdef _WIN32
			sprintf(szbuf, ">>>>>WARN(%04d): Commid_%02d (iLen=%d) is not enough in Buban104AiWithDataProcessWithM_ME_TD_1", 
				_getpid(), commid, len);
#else
			sprintf(szbuf, ">>>>>WARN(%04d): Commid_%02d (iLen=%d) is not enough in Buban104AiWithDataProcessWithM_ME_TD_1",
				getpid(), commid, len);
#endif
			DebugPrint(szbuf);
			break;
		}
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}
		
		aipnt -= pPortParam->iAiBaseAddr;

		pntmsg.RawValue = (short)((rtumsg->MsgData[i+1]<<8) + rtumsg->MsgData[i]);
		
		SetPntMsg(commid, aipnt, (void *)&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
		
		// 7字节时标
		i += 9;
	}
}

void Buban104AiWithDataProcessWithM_ME_TE_1(RTUMSG * rtumsg)
{
	Buban104AiWithDataProcessWithM_ME_TD_1(rtumsg);
}

void Buban104AiWithDataProcessWithM_ME_TF_1(RTUMSG * rtumsg)
{
	int					i, aipnt, len;
	AI_DEF				pntmsg;
	char				szbuf[256];
	float				fValue;
	int					commid, istart, istep;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;
	
	len = (int)rtumsg->MsgData[1];

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
		istep = 14;
	}
	else
	{
		istart = 12;
		istep = 15;
	}
	//处理变化遥测
	for ( i = istart; i < 2 + len; )
	{
		if( ( i + istep ) > (2 + len))
		{
#ifdef _WIN32
			sprintf(szbuf, ">>>>>WARN(%04d): Commid_%02d (iLen=%d) is not enough in Buban104AiWithDataProcessWithM_ME_TF_1", 
				_getpid(), commid, len);
#else
			sprintf(szbuf, ">>>>>WARN(%04d): Commid_%02d (iLen=%d) is not enough in Buban104AiWithDataProcessWithM_ME_TF_1",
				getpid(), commid, len);
#endif
			DebugPrint(szbuf);
			break;
		}

		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			aipnt = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}

		aipnt -= pPortParam->iAiBaseAddr;

		fValue = *((float *)&rtumsg->MsgData[i]);
		SequenceRtuToHost((char *)&fValue, sizeof(float));
		
		// 品质描述
		// rtumsg->MsgData[i+1];
		
		// 保留2位小数
		pntmsg.RawValue = (int)(fValue * 100);
		SetPntMsg(commid, aipnt, (void *)&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
			
		// 7字节时标
		i += 12;
	}
}

//Buban104 电度数据处理with time
void Buban104PiWithTimeDataProcessWithM_IT_TB_1(RTUMSG *rtumsg)
{
	int					i, point, len;
	AI_DEF				pntmsg;
	char				szbuf[256];
	int					commid, istart, istep;
	BUBAN104PORTPARAM	*pPortParam;

	commid	= rtumsg->PortIdx;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		istart = 10;
		istep = 14;
	}
	else
	{
		istart = 12;
		istep = 15;
	}
	len = (int)rtumsg->MsgData[1];    
	for ( i = istart; i < 2 + len; )
    {
		if( ( i + istep ) > (2 + len))
		{
#ifdef _WIN32
			sprintf(szbuf, ">>>>>WARN(%04d): Commid_%02d (iLen=%d) is not enough in Buban104PiWithTimeDataProcessWithM_IT_TB_1", 
				_getpid(), commid, len);
#else
			sprintf(szbuf, ">>>>>WARN(%04d): Commid_%02d (iLen=%d) is not enough in Buban104PiWithTimeDataProcessWithM_IT_TB_1",
				getpid(), commid, len);
#endif
			DebugPrint(szbuf);
			break;
		}

		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			point = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8);
			i += 2;
		}
		else
		{
			point = rtumsg->MsgData[i]+(rtumsg->MsgData[i+1]<<8)+(rtumsg->MsgData[i+2]<<16);
			i += 3;
		}
		point -= pPortParam->iPiBaseAddr;

		pntmsg.RawValue = (rtumsg->MsgData[i+3]<<24) + (rtumsg->MsgData[i+2]<<16)
			+ (rtumsg->MsgData[i+1]<<8) + rtumsg->MsgData[i];

		SetPntMsg(commid, point, (void *)&pntmsg, PI_PNT_TYPE, PNT_RAWVALUE);

		// 1 BYTE (IV CA CY     顺序号)
		// 7 BYTE 时标
		i += 12;
    }
}

//=========================以下为Buban104转发数据功能=======================//
void ProvBuban104dataProcess(int commid, RTUMSG *rtumsg)
{
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	// 数据校验错误( 附加字节的第二个字节)
	if(rtumsg->MsgData[rtumsg->MsgLen+1] > 0)
	{
		return;
	}

	// format-i
	if((rtumsg->MsgData[2] & 0x01) == 0)
	{
		if(pPortParam->LinkOk)
		{
			ProvBuban104FormatI(commid, rtumsg);
		}
	}
	// format-s,format-u
	else
	{
		// format-u
		if((rtumsg->MsgData[2] & 0x02) != 0)
		{
			ProvBuban104FormatU( commid, rtumsg );
		}
		// format-s
		else
		{
			ProvBuban104FormatS( commid, rtumsg );
		}
	}
}

void ProvBuban104FormatI(int commid, RTUMSG *rtumsg)
{
	//WORD	wLastSequence;
	int		iSequenceInc;
	BUBAN104PORTPARAM	*pPortParam;

	// length
	if( rtumsg->MsgData[1] < 4 )
	{
		return;
	}

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	// 超时计数清零
	pPortParam->lTimeOutCnt = 0;

	pPortParam->wAckSequence = (rtumsg->MsgData[4] + (rtumsg->MsgData[5]<<8)) >> 1;
	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++//	
	// wen 2005.09.19 帧序匹配算法修改
	/*
	if(pPortParam->wAckSequence == 0 )
	{
		wLastSequence = MAX_SEQUENCE;
	}
	else
	{
		wLastSequence = pPortParam->wAckSequence-1;
	}
	if((pPortParam->wSendSequence != pPortParam->wAckSequence)
		&& (pPortParam->wSendSequence != wLastSequence))
	{
		pPortParam->bAckRight = FALSE;
	}
	else
	{
		pPortParam->bCloseSocket = FALSE;
		pPortParam->bAckRight = TRUE;
	}
	*/
	iSequenceInc = pPortParam->wSendSequence - pPortParam->wAckSequence;
	if(iSequenceInc < 0)
	{
		iSequenceInc += MAX_SEQUENCE;
	}
	//不大于帧序应答尺寸(缺省值=MAX_FRAMEMATCHING_SIZE)
	if((pPortParam->wSendSequence != pPortParam->wAckSequence )
		&& (iSequenceInc > pPortParam->m_iFrameSize))
	{
		pPortParam->bAckRight = FALSE;
	}
	else
	{
		pPortParam->bCloseSocket = FALSE;
		pPortParam->bAckRight = TRUE;
	}
	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++//

	pPortParam->wRecvSequence = ((rtumsg->MsgData[2] + (rtumsg->MsgData[3]<<8)) >> 1)+1;
	pPortParam->wRecvSequence %= MAX_SEQUENCE;

	switch(rtumsg->MsgData[6])
    {
		case 1:		// 单点遥信处理
			break;

		case 2:		// 单点遥信SOE处理
			break;

		case 3:		// 双点遥信处理
			break;

		case 4:		// 单点遥信SOE处理
			break;

		case 5:		// 变压器分接头位置
			break;
		case 6:		// 变压器分接头位置带时标
			break;
		case 7:		// 总召唤数据 
			ProvBuban104SendAllData(commid, rtumsg);
			break;

		case 9:		// 带品质无时标遥测
			break;

		case 10:	// 带品质带时标遥测
			break;
			
		case 21:	// 全遥测数据处理 或变化数据
			break;
			
		case 15:	// 不带时标电度
			break;
		case 16:	// 带时标电度
			break;

		case 17:
		case 18:
		case 19:	// 保护数据
			break;

		case 45:	// wen 2006.07.11
		case 46:	// 遥控返校
		case 47:	// 遥调返校
			//ProvBuban104YkYtData(commid, rtumsg);
			break;

		case 100:	// 召唤数据
			//ProvBuban104SendAllData(commid, rtumsg);
			break;

		case 101:	// 召唤电度
			//ProvBuban104SendPIData(commid, rtumsg);
			break;
			
		case 103:	// 时间同步确认帧
			//ProvBuban104ProcessTime(commid, rtumsg);
			break;
	}
}

void ProvBuban104FormatU(int commid, RTUMSG *rtumsg)
{
	BUBAN104PORTPARAM	*pPortParam;

	// length
	if( rtumsg->MsgData[1] != 4 )
	{
		return;
	}

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	switch(rtumsg->MsgData[2] & 0xfc)
	{
		case 0x04:	// 启动动作
			InitBuban104CommandBuffer(commid);
			pPortParam->LinkOk = TRUE;
			MakeBuban104Command(commid, FORMAT_U_START_CON);
			break;
		case 0x10:	// 停止动作			
			pPortParam->LinkOk = FALSE;
			MakeBuban104Command(commid, FORMAT_U_STOP_CON);
			break;
		case 0x80:	// 测试动作响应
			pPortParam->bAckRight = TRUE;
			// 超时计数清零
			pPortParam->lTimeOutCnt = 0;
			pPortParam->bCloseSocket = FALSE;
			break;
		case 0x40:	// 测试动作
			//if(!pPortParam->LinkOk)
			//{
			//	break;
			//}
			pPortParam->LinkOk = TRUE;
			MakeBuban104Command(commid, FORMAT_U_TEST_CON);
			pPortParam->lTimeOutCnt = 0;
			pPortParam->bCloseSocket = FALSE;
			pPortParam->bAckRight = TRUE;
			break;
		default:	// 错误的响应
			pPortParam->bAckRight = FALSE;
			break;
	}
}

void ProvBuban104FormatS(int commid, RTUMSG *rtumsg)
{
	//WORD	wLastSequence;
	int		iSequenceInc;
	BUBAN104PORTPARAM	*pPortParam;

	// length
	if( rtumsg->MsgData[1] != 4 )
	{
		return;
	}

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	pPortParam->wAckSequence = (rtumsg->MsgData[4] + (rtumsg->MsgData[5]<<8)) >> 1;

	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++//
	// wen 2005.09.19 帧序匹配算法修改
	/*
	if(pPortParam->wAckSequence == 0)
	{
		wLastSequence = MAX_SEQUENCE;
	}
	else
	{
		wLastSequence = pPortParam->wAckSequence-1;
	}

	if((pPortParam->wSendSequence == (pPortParam->wAckSequence + 1) )
		|| (pPortParam->wSendSequence == wLastSequence))
	{
		pPortParam->bAckRight = TRUE;
		pPortParam->lTimeOutCnt = 0;
		pPortParam->bCloseSocket = FALSE;
	}
	*/

	iSequenceInc = pPortParam->wSendSequence - pPortParam->wAckSequence;
	if(iSequenceInc < 0)
	{
		iSequenceInc += MAX_SEQUENCE;
	}
	//不大于帧序应答尺寸(缺省值=MAX_FRAMEMATCHING_SIZE)
	if((pPortParam->wSendSequence == pPortParam->wAckSequence)
		|| (iSequenceInc < pPortParam->m_iFrameSize))
	{
		pPortParam->bAckRight = TRUE;
		pPortParam->lTimeOutCnt = 0;
		pPortParam->bCloseSocket = FALSE;
	}
	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++//
}

//响应分组召唤和总召唤
//总召唤确认(传送原因[8]=0x07,0x09确认; =0x0a 总召唤结束)
void ProvBuban104SendAllData(int commid, RTUMSG * rtumsg)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];
	int		iGroup, iCmdType, iLen=0;
	WORD	wTransCause;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	iGroup = rtumsg->MsgData[12];
	wTransCause = rtumsg->MsgData[8];

	iCmdType = FAST_POLL_CMD;
	
	//总召唤应答
	/*commandbuf[0] = 0x68;
	iLen = 2;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 8;		// 应答总召结束
	commandbuf[iLen++] = 0x81;	// 限定词VSQ
	commandbuf[iLen++] = 9;		// 传送原因
	commandbuf[iLen++] = 0;		// 应用服务单元公共地址
	commandbuf[iLen++] = 0;		// 应用服务单元公共地址
	commandbuf[iLen++] = 0xFF;	// 功能类型FUN
	commandbuf[iLen++] = 0;		// 信息序号INF
	commandbuf[iLen++] = 0;		// 扫描序号SCN
	commandbuf[1] = (BYTE)(iLen - 2);
	PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLen);*/

	
	//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
	// wen 2006.03.23 支持浮点数遥测的传送
	//ProvBuban104SendAI(commid, rtumsg, 0);
	//====================================================================
	//if(pPortParam->m_bProvAiType == 13)
	{
		ProvBuban104SendAIwithFloat(commid, rtumsg, 0);
	}
	/*else
	{
		ProvBuban104SendAI(commid, rtumsg, 0);
	}*/
	//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

	//ProvBuban104SendDI(commid, rtumsg, 0);
	memset(&commandbuf, 0, sizeof(commandbuf));
	//总召唤结束
	commandbuf[0] = 0x68;
	iLen = 2;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 8;		// 应答总召结束
	commandbuf[iLen++] = 0x81;	// 限定词VSQ
	commandbuf[iLen++] = 9;		// 传送原因
	commandbuf[iLen++] = 0;		// 应用服务单元公共地址
	commandbuf[iLen++] = 0;		// 应用服务单元公共地址
	commandbuf[iLen++] = 0xFF;	// 功能类型FUN
	commandbuf[iLen++] = 0;		// 信息序号INF
	commandbuf[iLen++] = 0;		// 扫描序号SCN
	commandbuf[1] = (BYTE)(iLen - 2);
	PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLen);

	//ProvMakeBuban104Command(commid, ASK_ALLDATA_END);
	pPortParam->m_psBaoHu->DiChange = FALSE;
	pPortParam->Initdata = TRUE;
}

/*
void ProvBuban104SendAllData(int commid, RTUMSG * rtumsg)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];
	int		iGroup, iCmdType, iLen = 0;
	WORD	wTransCause;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if (VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		iGroup = rtumsg->MsgData[12];
		wTransCause = rtumsg->MsgData[8];
	}
	else
	{
		iGroup = rtumsg->MsgData[15];
		wTransCause = rtumsg->MsgData[8] + (rtumsg->MsgData[9] << 8);
	}

	//分组召唤
	if (iGroup != 20)
	{
		iGroup -= 20;
		//无效组号
		if ((iGroup <= 0) || (iGroup > 12))
		{
			return;
		}
		if (iGroup > 8)
		{
			iGroup -= 8;
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
			// wen 2006.03.23 支持浮点数遥测的传送
			//ProvBuban104SendAI(commid, rtumsg, iGroup);
			//====================================================================
			if (pPortParam->m_bProvAiType == 13)
			{
				ProvBuban104SendAIwithFloat(commid, rtumsg, iGroup);
			}
			else
			{
				ProvBuban104SendAI(commid, rtumsg, iGroup);
			}
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
		}
		else
			ProvBuban104SendDI(commid, rtumsg, iGroup);
		return;
	}

	if (pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	//总召唤
	commandbuf[0] = 0x68;
	iLen = 2;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 100;
	commandbuf[iLen++] = 0;
	if (VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		switch (wTransCause)
		{
		case 0x0006://激活
			commandbuf[iLen++] = 7;
			break;
		case 0x0008://停止激活
		default:
			commandbuf[iLen++] = 9;
			break;
		}
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
	}
	else
	{
		switch (wTransCause)
		{
		case 0x0006://激活
			commandbuf[iLen++] = 7;
			commandbuf[iLen++] = 0;
			break;
		case 0x0008://停止激活
		default:
			commandbuf[iLen++] = 9;
			commandbuf[iLen++] = 0;
			break;
		}
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
	}
	commandbuf[iLen++] = 0x14;
	commandbuf[1] = (BYTE)(iLen - 2);
	PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLen);

	if (wTransCause != 0x0006)
	{
		return;
	}

	//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
	// wen 2006.03.23 支持浮点数遥测的传送
	//ProvBuban104SendAI(commid, rtumsg, 0);
	//====================================================================
	if (pPortParam->m_bProvAiType == 13)
	{
		ProvBuban104SendAIwithFloat(commid, rtumsg, 0);
	}
	else
	{
		ProvBuban104SendAI(commid, rtumsg, 0);
	}
	//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

	ProvBuban104SendDI(commid, rtumsg, 0);

	//总召唤结束
	ProvMakeBuban104Command(commid, ASK_ALLDATA_END);
	pPortParam->m_psBaoHu->DiChange = FALSE;
	pPortParam->Initdata = TRUE;
}
*/

void ProvBuban104SendPIData(int commid, RTUMSG * rtumsg)
{
	char				commandbuf[MAX_POLLCMD_BUF_LEN];
	int					iLen, iCmdType, iGroup;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		iGroup = rtumsg->MsgData[12] & 0x3F;
	}
	else
	{
		iGroup = rtumsg->MsgData[15] & 0x3F;
	}

	// wen 2006.04.03 发布时间97版和2000版组分配不同
	if(pPortParam->m_iPublishYear == 1997)
	{
		//分组召唤	
		if( iGroup != 1 )
		{
			//无效或者扩展组号
			if(( iGroup <= 0 ) || ( iGroup > 5 ))
			{
				return;
			}
			
			ProvBuban104SendPI(commid, rtumsg, iGroup-1);
			return;
		}
	}
	else
	{
		//分组召唤	
		if( iGroup != 5 )
		{
			//无效或者扩展组号
			if(( iGroup <= 0 ) || ( iGroup > 5 ))
			{
				return;
			}
			
			ProvBuban104SendPI(commid, rtumsg, iGroup);
			return;
		}
	}

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	//总召唤确认
	commandbuf[0] = 0x68;
	iLen = 2;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 101;
	commandbuf[iLen++] = 0;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[iLen++] = 7;
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = rtumsg->MsgData[12];
	}
	else
	{
		commandbuf[iLen++] = 7;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = rtumsg->MsgData[15];
	}
	commandbuf[1] = (BYTE)(iLen - 2);
	PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLen);

	ProvBuban104SendPI(commid, rtumsg, 0);

	//总召唤结束
	commandbuf[0] = 0x68;
	iLen = 2;
	//commandbuf[1] = 14;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 0;
	commandbuf[iLen++] = 101;
	commandbuf[iLen++] = 0;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[iLen++] = 10;
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = rtumsg->MsgData[12];
	}
	else
	{
		commandbuf[iLen++] = 10;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = 0;
		commandbuf[iLen++] = rtumsg->MsgData[15];
	}
	commandbuf[1] = (BYTE)(iLen - 2);
	PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLen);
	
	pPortParam->Initdata = TRUE;
}

void ProvBuban104ProcessTime(int commid, RTUMSG *rtumsg)
{
	int		iLen, iCmdType;
	char	commandbuf[MAX_POLLCMD_BUF_LEN];
	WORD	wTransCause;
	DAY_TIME			sCurTime;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		wTransCause = rtumsg->MsgData[8];
	}
	else
	{
		wTransCause = rtumsg->MsgData[8] + (rtumsg->MsgData[9]<<8);
	}
	//传送原因
	switch(wTransCause)
	{
		case 0x0006://激活(对时)
			commandbuf[0] = 0x68;
			//commandbuf[1] = 20;
			iLen = 2;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 103;
			commandbuf[iLen++] = 1;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = 7;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			else
			{
				commandbuf[iLen++] = 7;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			GetLocalTimeEx(&sCurTime);
			sCurTime.mSec = sCurTime.Sec * 1000 + sCurTime.mSec;
			commandbuf[iLen++] = sCurTime.mSec % 256;
			commandbuf[iLen++] = sCurTime.mSec / 256;
			commandbuf[iLen++] = (u_char)sCurTime.Min;
			commandbuf[iLen++] = (u_char)sCurTime.Hour;
			commandbuf[iLen++] = (u_char)sCurTime.Day;
			commandbuf[iLen++] = (u_char)sCurTime.Month;
			commandbuf[iLen++] = (u_char)(sCurTime.Year%100);
			commandbuf[1] = (BYTE)(iLen - 2);
			if(pPortParam->ProvAckOrNot)
			{
				iCmdType = INSERT_POLL_CMD;
			}
			else
			{
				iCmdType = FAST_POLL_CMD;
			}
			PutPollCmdToBuf(commid, FAST_POLL_CMD, 0, (char *)commandbuf, iLen);

			// 对时
			if(1 == pPortParam->m_psBaoHu->CheckTime)
			{
				if(VER_BUBAN_104 == pPortParam->RtuVersion)
				{
					sCurTime.mSec = rtumsg->MsgData[12] + (rtumsg->MsgData[13] << 8);
					sCurTime.Sec  = sCurTime.mSec/1000;
					sCurTime.mSec = sCurTime.mSec % 1000;
					sCurTime.Min  = rtumsg->MsgData[14] & 0x3F;
					sCurTime.Hour = rtumsg->MsgData[15] & 0x1F;
					sCurTime.Day  = rtumsg->MsgData[16] & 0x1F;
					sCurTime.Month= rtumsg->MsgData[17] & 0x0F;
					sCurTime.Year = (rtumsg->MsgData[18] & 0x7F)+2000;
				}
				else
				{
					sCurTime.mSec = rtumsg->MsgData[15] + (rtumsg->MsgData[16] << 8);
					sCurTime.Sec  = sCurTime.mSec/1000;
					sCurTime.mSec = sCurTime.mSec % 1000;
					sCurTime.Min  = rtumsg->MsgData[17] & 0x3F;
					sCurTime.Hour = rtumsg->MsgData[18] & 0x1F;
					sCurTime.Day  = rtumsg->MsgData[19] & 0x1F;
					sCurTime.Month= rtumsg->MsgData[20] & 0x0F;
					sCurTime.Year = (rtumsg->MsgData[21] & 0x7F)+2000;
				}
				SetLocalTimeEx(&sCurTime);
			}
			break;

		case 0x07://激活确认
			break;
	}
}

void ProvBuban104SendPI(int commid, RTUMSG *rtumsg, int iGroupNo)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];		
	DWORD	dwStartAddr;
	int		iLenth, iSendCount=1;
	int		i, j, iAllDataCount, iSendNum;
	int		iNo;
	int		iCmdType;
	PI_DEF	pntmsg;
	PROV_PI_PNT *piprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	if(iGroupNo == 0)//总召唤
	{
		dwStartAddr = MAX_GROUP_PINUM*iGroupNo + pPortParam->iPiBaseAddr;

		iAllDataCount = pPortParam->m_psBaoHu->PiNum;
		iSendCount = (iAllDataCount+MAX_104_PINUM-1)/MAX_104_PINUM;
		iCmdType = FAST_POLL_CMD;
	}
	else//分组召唤
	{
		dwStartAddr = MAX_GROUP_PINUM*(iGroupNo-1);
		iAllDataCount = pPortParam->m_psBaoHu->PiNum - dwStartAddr;
		
		dwStartAddr += pPortParam->iPiBaseAddr;

		if( iAllDataCount > MAX_GROUP_PINUM)
		{
			iSendCount = 2;
			if((iAllDataCount - MAX_GROUP_PINUM)>0)
				iAllDataCount = MAX_GROUP_PINUM;
		}
	}

	piprovptr = (PROV_PI_PNT *)pPortParam->m_psBaoHu->PiPtr;
	for(i = 0; i < iSendCount; i++)
	{
		commandbuf[0] = 0x68;
		commandbuf[2] = 0;
		commandbuf[3] = 0;
		commandbuf[4] = 0;
		commandbuf[5] = 0;
		commandbuf[6] = 15;		
		commandbuf[8] = 37+iGroupNo;
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
			iLenth = 10;
		}
		else
		{
			commandbuf[9] = 0;
			commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
			commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);
			iLenth = 12;
		}
		//遥测值
		if(iAllDataCount>MAX_104_PINUM)
		{
			iAllDataCount -= MAX_104_PINUM;
			iSendNum = MAX_104_PINUM;
		}
		else
		{
			iSendNum = iAllDataCount;
		}

		for(j = 0; j < iSendNum; j++, dwStartAddr++)
		{
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLenth++] = (char)(dwStartAddr & 0x00ff);
				commandbuf[iLenth++] = (char)((dwStartAddr & 0xff00)>>8);
			}
			else
			{
				commandbuf[iLenth++] = (char)(dwStartAddr & 0x00ff);
				commandbuf[iLenth++] = (char)((dwStartAddr & 0xff00)>>8);
				commandbuf[iLenth++] = (char)((dwStartAddr & 0xff0000)>>16);
			}

			iNo = dwStartAddr - pPortParam->iPiBaseAddr;

			pntmsg.RawValue = 0;
			GetPntMsg(piprovptr[iNo].PortNo, piprovptr[iNo].PntNo,
				(void *)&pntmsg, PI_PNT_TYPE, PNT_RAWVALUE);
			piprovptr[iNo].ChangeFlag = FALSE;
			
			commandbuf[iLenth++] = (char)(pntmsg.RawValue & 0x000000ff);
			commandbuf[iLenth++] = (char)((pntmsg.RawValue & 0x0000ff00)>>8);
			commandbuf[iLenth++] = (char)((pntmsg.RawValue & 0x00ff0000)>>16);
			commandbuf[iLenth++] = (char)((pntmsg.RawValue & 0xff000000)>>24);
			commandbuf[iLenth++] = (char)(j+1);			
		}

		commandbuf[7] = (BYTE)j;
		commandbuf[1] = (char)(iLenth-2);
		PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);
	}
}

void ProvBuban104SendAI(int commid, RTUMSG *rtumsg, int iGroupNo)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];		
	DWORD	dwStartAddr;
	int		iLenth, iSendCount=1;
	int		i, j, iAllDataCount, iSendNum;
	int		iNo, iCmdType;
	AI_DEF      pntmsg;
	PROV_AI_PNT	*aiprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	if( iGroupNo == 0 )//总召唤
	{
		dwStartAddr = MAX_GROUP_AINUM*iGroupNo + pPortParam->iAiBaseAddr;

		iAllDataCount = pPortParam->m_psBaoHu->AiNum;
		iSendCount = (iAllDataCount+MAX_AINUM-1)/MAX_AINUM;
		iCmdType = FAST_POLL_CMD;
	}
	else//分组召唤
	{
		dwStartAddr = MAX_GROUP_AINUM*(iGroupNo-1);
		iAllDataCount = pPortParam->m_psBaoHu->AiNum - dwStartAddr;		
		dwStartAddr += pPortParam->iAiBaseAddr;
		
		if(iAllDataCount > MAX_AINUM)
		{
			iSendCount = 2;
			if((iAllDataCount - MAX_GROUP_AINUM) > 0)
			{
				iAllDataCount = MAX_GROUP_AINUM;
			}
		}
	}

	aiprovptr = (PROV_AI_PNT *)pPortParam->m_psBaoHu->AiPtr;
	for( i = 0; i < iSendCount; i++ )
	{
		commandbuf[0] = 0x68;
		commandbuf[2] = 0;
		commandbuf[3] = 0;
		commandbuf[4] = 0;
		commandbuf[5] = 0;
		commandbuf[6] = 21;		
		//commandbuf[8] = rtumsg->MsgData[15];
		commandbuf[8] = rtumsg->MsgData[8];
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
			// 信息体地址为2个字节
			//*((DWORD*)(&commandbuf[12])) = dwStartAddr;
			commandbuf[10] = LOBYTE(LOWORD(dwStartAddr));
			commandbuf[11] = HIBYTE(LOWORD(dwStartAddr));
			iLenth = 12;
		}
		else
		{
			commandbuf[9] = 0;
			commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
			commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);
			// 信息体地址为3个字节
			//*((DWORD*)(&commandbuf[12])) = dwStartAddr;
			commandbuf[12] = LOBYTE(LOWORD(dwStartAddr));
			commandbuf[13] = HIBYTE(LOWORD(dwStartAddr));
			commandbuf[14] = LOBYTE(HIWORD(dwStartAddr));
			iLenth = 15;
		}

		//遥测值
		if(iAllDataCount > MAX_AINUM)
		{
			iAllDataCount -= MAX_AINUM;
			iSendNum = MAX_AINUM;			
		}
		else
		{
			iSendNum = iAllDataCount;
		}

		iNo = dwStartAddr - pPortParam->iAiBaseAddr;
		for( j = 0; j < iSendNum; j++ )
		{
			GetPntMsg(aiprovptr[iNo+j].PortNo, aiprovptr[iNo+j].PntNo,
				&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
			aiprovptr[iNo+j].ChangeFlag = FALSE;			
			commandbuf[iLenth++] = (char)(pntmsg.RawValue);
			commandbuf[iLenth++] = (char)((pntmsg.RawValue&0xff00)>>8);
		}

		commandbuf[7] = (BYTE)j;
		commandbuf[7] |= 0x80;
		commandbuf[1] = (char)(iLenth-2);
		
		PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);

		dwStartAddr += MAX_AINUM;
	}
}

void ProvBuban104SendDI(int commid, RTUMSG *rtumsg, int iGroupNo)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];
		
	DWORD	dwStartAddr;
	int		iLenth, iSendCount=1;
	int		i, j, iAllDataCount, iSendNum;
	int		iNo, iCmdType;
	DI_DEF      pntmsg;
	PROV_DI_PNT	*diprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	if(iGroupNo == 0)//总召唤
	{
		dwStartAddr = MAX_GROUP_DINUM*iGroupNo + pPortParam->iDiBaseAddr;

		iAllDataCount = pPortParam->m_psBaoHu->DiNum;
		iSendCount = (iAllDataCount+MAX_DINUM-1)/MAX_DINUM;
		iCmdType = FAST_POLL_CMD;
	}
	else//分组召唤
	{
		dwStartAddr = MAX_GROUP_DINUM*(iGroupNo-1);
		iAllDataCount = pPortParam->m_psBaoHu->DiNum - dwStartAddr;
		
		dwStartAddr += pPortParam->iDiBaseAddr;

		if( iAllDataCount > MAX_GROUP_DINUM)
		{
			iAllDataCount = MAX_GROUP_DINUM;
		}
	}

	diprovptr = (PROV_DI_PNT *)pPortParam->m_psBaoHu->DiPtr;
	for(i=0; i<iSendCount; i++)
	{
		commandbuf[0] = 0x68;
		commandbuf[2] = 0;
		commandbuf[3] = 0;
		commandbuf[4] = 0;
		commandbuf[5] = 0;
		commandbuf[6] = 1;//=3,为双点
		commandbuf[8] = rtumsg->MsgData[12];
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
			commandbuf[10] = LOBYTE(LOWORD(dwStartAddr));
			commandbuf[11] = HIBYTE(LOWORD(dwStartAddr));
			iLenth = 12;
		}
		else
		{
			commandbuf[9] = 0;
			commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
			commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);
			// 信息体地址为3个字节
			//*((DWORD*)(&commandbuf[12])) = dwStartAddr;
			commandbuf[12] = LOBYTE(LOWORD(dwStartAddr));
			commandbuf[13] = HIBYTE(LOWORD(dwStartAddr));
			commandbuf[14] = LOBYTE(HIWORD(dwStartAddr));
			iLenth = 15;
		}

		if(iAllDataCount > MAX_DINUM)
		{
			iAllDataCount -= MAX_DINUM;
			iSendNum = MAX_DINUM;			
		}
		else
		{
			iSendNum = iAllDataCount;
		}

		iNo = dwStartAddr - pPortParam->iDiBaseAddr;
		for( j = 0; j < iSendNum; j++ )
		{
			GetPntMsg(diprovptr[iNo+j].PortNo, diprovptr[iNo+j].PntNo,
				&pntmsg, DI_PNT_TYPE, PNT_STATUS);
			diprovptr[iNo+j].ChangeFlag = FALSE;
			commandbuf[iLenth++] = pntmsg.Status;
		}

		commandbuf[7] = (char)j;
		commandbuf[7] |= 0x80;
		commandbuf[1] = (char)(iLenth-2);
		
		PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);
		
		dwStartAddr += MAX_DINUM;
	}
}

void ProvBuban104SendSoe(int commid)
{
	u_char	commandbuf[MAX_POLLCMD_BUF_LEN];

	BOOL	bHaveData = FALSE;
	WORD	wmSec;
	DWORD	dwAddr;
	int		iLenth, iSendCount=1;
	int		iDataNum, iCmdType;
	SOE_DEF  	soemsg;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(ProvHaveSoeData(commid) <= 0)
	{
		return;
	}

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	commandbuf[0] = 0x68;
	commandbuf[2] = 0;
	commandbuf[3] = 0;
	commandbuf[4] = 0;
	commandbuf[5] = 0;
	commandbuf[6] = 2;//单点soe
	commandbuf[8] = 3;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
	}
	else
	{
		commandbuf[9] = 0;
		commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);	
	}

	bHaveData = TRUE;
	iLenth = 12;
	iDataNum = 0;

	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
	// wen 2006.07.12 修改soe为单个时，数据丢失的问题.
	/*while(ProvAndDelGetSoeData(commid, &soemsg) > 0)
	{
		iDataNum++;
		dwAddr = (DWORD)(pPortParam->iDiBaseAddr+soemsg.iPntNo);
		
		commandbuf[iLenth++] = LOBYTE(LOWORD(dwAddr));
		commandbuf[iLenth++] = HIBYTE(LOWORD(dwAddr));
		if(VER_IEC870_5_104 == pPortParam->RtuVersion)
		{
			commandbuf[iLenth++] = LOBYTE(HIWORD(dwAddr));
		}
		commandbuf[iLenth++] = soemsg.bStatus;
		wmSec = soemsg.SoeTime.mSec + soemsg.SoeTime.Sec*1000;
		commandbuf[iLenth++] = LOBYTE(wmSec);
		commandbuf[iLenth++] = HIBYTE(wmSec);
		commandbuf[iLenth++] = soemsg.SoeTime.Min & 0x3f;
		if(iLenth >= 251)
		{
			break;
		}
	}*/
	//===========================================================	
	while(ProvHaveSoeData(commid) > 0)
	{
		ProvAndDelGetSoeData(commid, &soemsg);
		iDataNum++;
		dwAddr = (DWORD)(pPortParam->iDiBaseAddr+soemsg.iPntNo);
		
		commandbuf[iLenth++] = LOBYTE(LOWORD(dwAddr));
		commandbuf[iLenth++] = HIBYTE(LOWORD(dwAddr));
		if(VER_IEC870_5_104 == pPortParam->RtuVersion)
		{
			commandbuf[iLenth++] = LOBYTE(HIWORD(dwAddr));
		}
		commandbuf[iLenth++] = soemsg.bStatus;
		wmSec = soemsg.SoeTime.mSec + soemsg.SoeTime.Sec*1000;
		commandbuf[iLenth++] = LOBYTE(wmSec);
		commandbuf[iLenth++] = HIBYTE(wmSec);
		commandbuf[iLenth++] = soemsg.SoeTime.Min & 0x3f;
		if(iLenth >= 248)
		{
			break;
		}
	}
	//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

	commandbuf[7] = (BYTE)iDataNum;
	commandbuf[1] = (BYTE)(iLenth-2);
	PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);
}

void ProvBuban104YkYtData(int commid, RTUMSG *rtumsg)
{
	PROV_DI_PNT		*diprovptr;
	DI_DEF			*diptr;	
	int				ykytcommid, provpnt;
	int				ykytpnt, ykytop, step;
	BYTE			bYkOperate;
	YKYT_PARAM		YkYtParam;
	BUBAN104PORTPARAM *pPortParam;
	char szbuf[128];

	ykytpnt = 0;
	ykytop = 3;
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		bYkOperate = rtumsg->MsgData[12];
		ykytpnt = rtumsg->MsgData[10] + (rtumsg->MsgData[11]<<8);
	}
	else
	{
		bYkOperate = rtumsg->MsgData[15];
		// wen 2005.11.27 修改最高字节信息体地址不做判断
		//ykytpnt = rtumsg->MsgData[12] + (rtumsg->MsgData[13]<<8) + (rtumsg->MsgData[14]<<16);
		ykytpnt = rtumsg->MsgData[12] + (rtumsg->MsgData[13]<<8);
	}

	if(rtumsg->MsgData[8] == 8)
	{
		step = STEP_YKYT_CANCEL;
	}
	else
	{
		if(bYkOperate & 0x80) //选择返校
		{
			step = STEP_YKYT_SELECT;
		}
		else
		{
			step = STEP_YKYT_EXEC;			
		}
	}
			
	if(ShmGetDispYkYtFlag())
	{
#ifdef _WIN32
		printf("TIP_(%04d): commid =%d recv ykyt select.\n", _getpid(), commid);
#else
		printf("TIP_(%04d): commid =%d recv ykyt select.\n", getpid(), commid);
#endif
	}

	ykytpnt -= pPortParam->iYkBaseAddr;
	ykytpnt += 1;

	if(rtumsg->MsgData[6] == 45)
	{
		// ykytop == 1 控合, == 2 控分
		ykytop = ((bYkOperate & 0x03) == 1) ? 1 : 2;
	}
	else if(rtumsg->MsgData[6] == 46)
	{
		ykytop = ((bYkOperate & 0x03) == 2) ? 1 : 2;
	}
	else // == 47
	{
		//step = STEP_YKYT_CANCEL;
		MakeProvBuban104YkYtAckMsg(commid, ykytpnt, 3, step);
		return;
	}
		
	provpnt = FindProvPntFromYkYtPnt(commid, ykytpnt, pPortParam->m_psBaoHu);
	if(provpnt < 0)	// 控点号错
	{
					sprintf(szbuf, "WARN(%04d): 控点错误.\n", _getpid());
					DebugPrint(szbuf);
		MakeProvBuban104YkYtAckMsg(commid, ykytpnt, 3, step);
	}
	else
	{
		diprovptr = (PROV_DI_PNT *)pPortParam->m_psBaoHu->DiPtr;
		ykytcommid = diprovptr[provpnt].PortNo;
		if(!SioParam[ykytcommid].m_psBaoHu)
		{
			MakeProvBuban104YkYtAckMsg(commid, ykytpnt, 3, step);
			return;
		}

		if(!SioParam[ykytcommid].m_psBaoHu->DiPtr)
		{
					sprintf(szbuf, "WARN(%04d): 没有控点m_psBaoHu->DiPtr=NULL.\n", _getpid());
					DebugPrint(szbuf);
			MakeProvBuban104YkYtAckMsg(commid, ykytpnt, 3, step);
			return;
		}

		diptr = (DI_DEF *)SioParam[ykytcommid].m_psBaoHu->DiPtr;

		// 如果对应点没有控点或者控点不相等
		if(!diptr[diprovptr[provpnt].PntNo].CtrlEnable)
		{
					sprintf(szbuf, "WARN(%04d): 对应点没有控点或者控点不相等.\n", _getpid());
					DebugPrint(szbuf);
			MakeProvBuban104YkYtAckMsg(commid, ykytpnt, 3, step);
			return;
		}

		if(STEP_YKYT_SELECT == step)
		{
			if(STEP_YKYT_SELECT == SioParam[ykytcommid].m_psBaoHu->ProvYkYtMsg.m_iYkYtStep)
			{
				if(!ProvPortYkYtIsTimeOut(ykytcommid, &SioParam[ykytcommid].m_psBaoHu->ProvYkYtMsg))
				{
					sprintf(szbuf, "WARN(%04d): 超时 failed.\n", _getpid());
					DebugPrint(szbuf);
					MakeProvBuban104YkYtAckMsg(commid, ykytpnt, 3, step);
					return;
				}
			}
		}

		SioParam[ykytcommid].m_psBaoHu->ProvYkYtMsg.m_iProvPntIdx = provpnt;
		SioParam[ykytcommid].m_psBaoHu->ProvYkYtMsg.m_iProvPortIdx = commid;
		SioParam[ykytcommid].m_psBaoHu->ProvYkYtMsg.m_iProvYkYtPointIdx = ykytpnt;
		SioParam[ykytcommid].m_psBaoHu->ProvYkYtMsg.m_iYkYtPointIdx = diptr[diprovptr[provpnt].PntNo].ControlNo;
		SioParam[ykytcommid].m_psBaoHu->ProvYkYtMsg.m_iYkYtOperate = ykytop;

		// buf[0] --- 端口号(=commid)
		// buf[1]
		// buf[2]
		// buf[3]
		// buf[4] --- 控点号
		// buf[5]
		// buf[6]
		// buf[7]
		// buf[8] --- 操作类型(遥控:1=选择,2=执行,3=取消,7=直控; 
		//                     遥调:4=选择,5=执行,6=取消,8=急停)
		// buf[9] --- 控制状态(1=分到合，2=合到分)
		//                    (最高位为1时，为返校命令, 1=成功, 0=失败)						
		//buf[0] = ykytcommid & 0xFF;
		//buf[1] = (ykytcommid & 0xFF00) >> 8;
		//buf[2] = (ykytcommid & 0xFF0000) >> 16;
		//buf[3] = (ykytcommid & 0xFF000000) >> 24;
		//buf[4] = diptr[diprovptr[provpnt].PntNo].ControlNo & 0xFF;
		//buf[5] = (diptr[diprovptr[provpnt].PntNo].ControlNo & 0xFF00) >> 8;
		//buf[6] = (diptr[diprovptr[provpnt].PntNo].ControlNo & 0xFF0000) >> 16;
		//buf[7] = (diptr[diprovptr[provpnt].PntNo].ControlNo & 0xFF000000) >> 24;						
		//buf[8] = STEP_YKYT_SELECT;
		//buf[9] = ykytop;						
		//SendYkYtCommand(ykytcommid, (char *)buf, 10);	// 发送遥控遥调命令

		YkYtParam.m_iYkYtOperate = ykytop;
		YkYtParam.m_iYkYtPnt = diptr[diprovptr[provpnt].PntNo].ControlNo;
		YkYtParam.m_iYkYtStep = step;
		YkYtParam.m_iYkYtUpDown = YKYT_SEND_DOWN;
		SendYkYtCommand2(ykytcommid, &YkYtParam);

		if(STEP_YKYT_EXEC == step)
		{
			MakeProvBuban104YkYtAckMsg(commid, ykytpnt, ykytop, step);
			MakeProvBuban104YkYtAckMsg(commid, ykytpnt, ykytop, STEP_YKYT_NOEXEC);
		}
	}
}

void MakeProvBuban104YkYtAckMsg(int commid, int pnt, int op, int step)
{
	int					iCount, ykpoint, iLen;
    char				commandbuf[MAX_POLLCMD_BUF_LEN];
	BUBAN104PORTPARAM	*pPortParam;
		
	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	memset(commandbuf, 0, sizeof(commandbuf));
	iCount = 4;
	commandbuf[0] = 0x68;
	commandbuf[1] = 14;
	switch(pPortParam->YkMode)
	{
		case CONTROL_SINGAL:		// 单点控制
			commandbuf[6] = 45;
			break;
		case CONTROL_DOUBLE:		// 双点控制
		case CONTROL_DIRECT:		// 直接控制
			commandbuf[6] = 46;		// 47;
			break;
	}
	commandbuf[7] = 1;
	//commandbuf[8];// 传送原因

	iLen = 9;
	ykpoint = (pnt-1) + pPortParam->iYkBaseAddr;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = LOBYTE(LOWORD(ykpoint));
		commandbuf[iLen++] = HIBYTE(LOWORD(ykpoint));
	}
	else
	{
		commandbuf[iLen++] = 0;	
		commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
		commandbuf[iLen++] = LOBYTE(LOWORD(ykpoint));
		commandbuf[iLen++] = HIBYTE(LOWORD(ykpoint));
		commandbuf[iLen++] = LOBYTE(HIWORD(ykpoint));
	}
	
	switch(step)
	{
		case STEP_YKYT_SELECT:		// 选择
			commandbuf[8] = 7;
			commandbuf[iLen] = 0xfc;
			break;
		
		case STEP_YKYT_EXEC:         // 执行
			commandbuf[8] = 7;			
			commandbuf[iLen] = 0x7c;
			break;
    
		case STEP_YKYT_CANCEL:			// 撤销
			commandbuf[8] = 9;
			commandbuf[iLen] = 0xfc;
			break;

		default:// 结束帧
			commandbuf[8] = 10;
			commandbuf[iLen] = 0;
			break;
	}

	// DCS/RCS
	switch(op)
	{
		case 1:	// 选择合
			if(CONTROL_SINGAL == pPortParam->YkMode)
			{
				commandbuf[iLen] |= 1;
			}
			else
			{
				commandbuf[iLen] |= 2;
			}
           	break;
       	case 2:	// 选择分
			if(CONTROL_SINGAL != pPortParam->YkMode)
			{
				commandbuf[iLen] |= 1;
			}
			break;
       	case 3:	// 选择失败
		default:
			commandbuf[8] |= 0x40;
			break;
	}
	
	iLen++;
	PutPollCmdToBuf(commid, INSERT_POLL_CMD, 0, (char *)commandbuf, iLen);

	if(ShmGetDispYkYtFlag())
	{
		printf("TIP_(%04d): commid =%d ykytpnt=%d, op=%d checked.\n", _getpid(), commid, pnt, op);
	}
}

void ProvBuban104SendClass1(int commid)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];
	DWORD	dwStartAddr;
	int		iLenth, iSendCount=1;
	int		j, iDataNum, iCmdType;
	DI_DEF      pntmsg;
	PROV_DI_PNT	*diprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(!pPortParam->m_psBaoHu->DiChange)
	{
		return;
	}

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	// wen 2005.01.15 修改数据信息体起始地址
	dwStartAddr = pPortParam->iDiBaseAddr;

	commandbuf[0] = 0x68;
	commandbuf[2] = 0;
	commandbuf[3] = 0;
	commandbuf[4] = 0;
	commandbuf[5] = 0;
	commandbuf[6] = 1;//=3,为双点	
	commandbuf[8] = 3;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
		iLenth = 10;
	}
	else
	{
		commandbuf[9] = 0;
		commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);	
		iLenth = 12;
	}
	diprovptr = (PROV_DI_PNT *)pPortParam->m_psBaoHu->DiPtr;
	for(j = 0, iDataNum = 0; j<pPortParam->m_psBaoHu->DiNum; j++)
	{
		if(diprovptr[j].ChangeFlag)
		{
			iDataNum++;
			commandbuf[iLenth++] = LOBYTE(LOWORD(dwStartAddr+j));
			commandbuf[iLenth++] = HIBYTE(LOWORD(dwStartAddr+j));
			if(VER_IEC870_5_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLenth++] = LOBYTE(HIWORD(dwStartAddr+j));
			}

			GetPntMsg(diprovptr[j].PortNo, diprovptr[j].PntNo,
				&pntmsg, DI_PNT_TYPE, PNT_STATUS);
			diprovptr[j].ChangeFlag = FALSE;
			commandbuf[iLenth++] = pntmsg.Status;
			if(iLenth > 256)
			{
				break;
			}
		}
	}

	if(j >= pPortParam->m_psBaoHu->DiNum)
	{
		pPortParam->m_psBaoHu->DiChange = FALSE;
	}

	commandbuf[7] = (char)iDataNum;
	commandbuf[1] = (char)(iLenth-2);
	PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);
}

void ProvBuban104SendClass2(int commid)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];

	BOOL	bHaveData = FALSE;
	DWORD	dwStartAddr;
	int		iLenth, iSendCount=1;
	int		j, iDataNum, iCmdType;
	AI_DEF      pntmsg;
	PROV_AI_PNT	*aiprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(!pPortParam->m_psBaoHu->AiChange)
	{
		return;
	}

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	commandbuf[0] = 0x68;
	commandbuf[2] = 0;
	commandbuf[3] = 0;
	commandbuf[4] = 0;
	commandbuf[5] = 0;
	commandbuf[6] = 21;
	commandbuf[8] = 3;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
		iLenth = 10;
	}
	else
	{
		commandbuf[9] = 0;
		commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);	
		iLenth = 12;
	}
	
	// wen 2005.01.15 修改数据信息体起始地址
	dwStartAddr = pPortParam->iAiBaseAddr;
	commandbuf[6] = 21;
	//遥测值
	aiprovptr = (PROV_AI_PNT *)pPortParam->m_psBaoHu->AiPtr;
	for(j = 0, iDataNum = 0; j < pPortParam->m_psBaoHu->AiNum; j++)
	{
		if(aiprovptr[j].ChangeFlag)
		{
			iDataNum++;
			bHaveData = TRUE;

			commandbuf[iLenth++] = LOBYTE(LOWORD(dwStartAddr+j));
			commandbuf[iLenth++] = HIBYTE(LOWORD(dwStartAddr+j));
			if(VER_IEC870_5_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLenth++] = LOBYTE(HIWORD(dwStartAddr+j));
			}

			GetPntMsg(aiprovptr[j].PortNo, aiprovptr[j].PntNo,
				&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
			aiprovptr[j].ChangeFlag = FALSE;
			commandbuf[iLenth++] = (char)(pntmsg.RawValue);
			commandbuf[iLenth++] = (char)((pntmsg.RawValue&0xff00)>>8);

			if(iLenth >= 251)
			{
				break;
			}
		}
	}

	if(j >= pPortParam->m_psBaoHu->AiNum)
	{
		pPortParam->m_psBaoHu->AiChange = false;
	}

	if(bHaveData)
	{
		commandbuf[7] = (char)iDataNum;
		commandbuf[1] = (char)(iLenth-2);
		PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);
	}
}

void ProvMakeBuban104Command(int commid, u_char cmdidx)
{
	int					iLen;
	char				commandbuf[MAX_POLLCMD_BUF_LEN];
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

    switch(cmdidx)
    {
		case ASK_SECOND_DATA:		// 召唤2级数据
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
			// wen 2006.03.23 支持浮点数遥测的传送
			//ProvBuban104SendClass2(commid);
			//====================================================================
			if(pPortParam->m_bProvAiType == 13)
			{
				ProvBuban104SendClass2withFloat(commid);
			}
			else
			{
				ProvBuban104SendClass2(commid);
			}
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
			break;

		case ASK_FIRST_DATA:		// 召唤1级数据
			ProvBuban104SendClass1(commid);
			break;

		case ASK_ALLDATA_END:		// 总召唤结束帧
			commandbuf[0] = 0x68;
			//commandbuf[iLen++] = 14;
			iLen = 2;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 0;
			commandbuf[iLen++] = 100;
			commandbuf[iLen++] = 1;
			commandbuf[iLen++] = 10;
			if(VER_BUBAN_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			else
			{
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = LOBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = HIBYTE(pPortParam->wLinkAddr);
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
				commandbuf[iLen++] = 0;
			}
			commandbuf[iLen++] = 0x14;
			commandbuf[1] = (BYTE)(iLen - 2);
			if(pPortParam->ProvAckOrNot)
			{
				PutPollCmdToBuf(commid, NORMAL_POLL_CMD, 0, (char *)commandbuf, iLen);
			}
			else
			{
				PutPollCmdToBuf(commid, FAST_POLL_CMD, 0, (char *)commandbuf, iLen);
			}
			pPortParam->Initdata = TRUE;
			break;

		case RTU_TIME:				// 时间同步
			break;

		case ASK_DI_DATA:			// 召唤2级数据YX
			break;

		case ASK_AI_DATA:			// 召唤2级数据YC
			break;

		case ASK_PI_DATA:			// 召唤2级数据YM
			break;

		case ASK_PI:				//召唤电度量
			break;

		case ASK_ALL_DATA:			// 召唤初始化数据			
			break;
    }
}
/*
int j	// 对应数据库数据点号
int *igno // 组号
int* iItemNo 条目号
DAY_TIME* sCurTime  时间
float* pfValue  数据值
typedef struct
{
	WORD		Year;
	u_char		Month;
	u_char		Day;
	u_char		WeekDay;
	u_char		MonthDay;
	u_char		Hour;
	u_char		Min;
	u_char		Sec;
	u_char		reserved;
	WORD		mSec;
} DAY_TIME;
返回值1：成功取值 -1：取值失败
*/
int GetAIPntMsg(int j, int *igno, int* iItemNo, DAY_TIME* sCurTime, float* pfValue, int *iaddr)
{
	*igno = 1;
	*iItemNo = 1;
	*iaddr = 1;
	sCurTime->Hour = 12;
	sCurTime->Min = 30;
	sCurTime->Month = 11;
	sCurTime->MonthDay = 1;
	sCurTime->mSec = 600;
	sCurTime->Sec = 26;
	sCurTime->Year = 2023;
	*pfValue = 36.6;
	return 1;
}

void ProvBuban104SendAIwithFloat(int commid, RTUMSG *rtumsg, int iGroupNo)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];		
	//DWORD	dwStartAddr;
	int		iLenth, iSendCount=1, iaddr0=1, iaddr1=1;
	int		i, j, iAllDataCount, iSendNum,flag;
	int		iNo, iCmdType, igno,iItemNo;
	float	*pfValue;
	DAY_TIME			sCurTime;
	AI_DEF      pntmsg;
	PROV_AI_PNT	*aiprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	iCmdType = FAST_POLL_CMD;

	if( iGroupNo == 0 )//总召唤
	{
		//dwStartAddr = MAX_GROUP_AINUM*iGroupNo + pPortParam->iAiBaseAddr;

		iAllDataCount = pPortParam->m_psBaoHu->AiNum;
		iCmdType = FAST_POLL_CMD;
	}

	//aiprovptr = (PROV_AI_PNT *)pPortParam->m_psBaoHu->AiPtr;
	for( i = 0; i < iAllDataCount; /*i++*/ )
	{
		memset(commandbuf, 0, sizeof(commandbuf));
		commandbuf[0] = 0x68;
		commandbuf[2] = 0;
		commandbuf[3] = 0;
		commandbuf[4] = 0;
		commandbuf[5] = 0;
		commandbuf[6] = 10;		// 类型标识TYP
		commandbuf[7] = 0x81;	// 可变结构限定词VSQ
		commandbuf[8] = 0x2A;	// 传送原因COT
		commandbuf[9] = 0;		//
		commandbuf[10] = 0;		// 应用服务数据单元公共地址
		commandbuf[11] = 254;	// 功能类型FUN
		commandbuf[12] = 241;	// 信息序号INF
		commandbuf[13] = 0;		// 返回信息标识码RII

		//遥测值
		if(iAllDataCount-i > MAX_FLOATAINUM)
		{
			iSendNum = MAX_FLOATAINUM;			
			commandbuf[14] = (iSendNum & 0x80);		// 通用分类数据集数目NGD
		}
		else
		{
			iSendNum = iAllDataCount-i;
			commandbuf[14] = iSendNum;		// 通用分类数据集数目NGD
		}

		iNo = i;
		iLenth = 15;
		for( j = 0; j < iSendNum; j++ )
		{
			pfValue = (float *)&commandbuf[iLenth+14];
			flag = GetAIPntMsg(j+iNo, (unsigned int*)&igno, (unsigned int*)&iItemNo, &sCurTime, pfValue, (unsigned int*)&iaddr1);
			if (0 == flag)
				break;
			if (-1 == flag)
				continue;
			if (iaddr1 == iaddr0)
				;
			else
			{
				iaddr0 = iaddr1;
				if (15 == iLenth)
					;
				else
					break;
			}
			commandbuf[iLenth] = igno;
			commandbuf[iLenth++] = iItemNo;
			commandbuf[iLenth++] = 1;		// 描述类别KOD（实际值）
			commandbuf[iLenth++] = 7;		// 数据类型
			commandbuf[iLenth++] = 4;		// 数据宽度
			commandbuf[iLenth++] = 4;		// 数据数目
			commandbuf[iLenth++] = sCurTime.mSec % 256;
			commandbuf[iLenth++] = sCurTime.mSec / 256;
			commandbuf[iLenth++] = (u_char)sCurTime.Min;
			commandbuf[iLenth++] = (u_char)sCurTime.Hour;
			commandbuf[iLenth++] = (u_char)sCurTime.Day;
			commandbuf[iLenth++] = (u_char)sCurTime.Month;
			commandbuf[iLenth++] = (u_char)(sCurTime.Year % 100);
			iLenth += 12;
			//*pfValue = SequenceHostToRtufloat((float)((int)pntmsg.RawValue));

			//iLenth += sizeof(float);
			//commandbuf[iLenth++] = 0;
		}
		if (15 == iLenth)
			break;
		commandbuf[9] = (u_char)iaddr0;		//
		commandbuf[10] = (u_char)(iaddr0 >> 8);		// 应用服务数据单元公共地址
		i += j;

		if (flag == -1)
		{
			i = iAllDataCount;
		}
		if(i >= iAllDataCount)
		{
			commandbuf[14] = j;		// 通用分类数据集数目NGD
		}
		else
			commandbuf[14] = (j & 0x80);		// 通用分类数据集数目NGD

		commandbuf[1] = (char)(iLenth-2);
		
		PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);
	}
}

/*void ProvBuban104SendAIwithFloat(int commid, RTUMSG *rtumsg, int iGroupNo)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];		
	DWORD	dwStartAddr;
	int		iLenth, iSendCount=1;
	int		i, j, iAllDataCount, iSendNum;
	int		iNo, iCmdType;
	float	*pfValue;
	AI_DEF      pntmsg;
	PROV_AI_PNT	*aiprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	if( iGroupNo == 0 )//总召唤
	{
		dwStartAddr = MAX_GROUP_AINUM*iGroupNo + pPortParam->iAiBaseAddr;

		iAllDataCount = pPortParam->m_psBaoHu->AiNum;
		iSendCount = (iAllDataCount+MAX_FLOATAINUM-1)/MAX_FLOATAINUM;
		iCmdType = FAST_POLL_CMD;
	}
	else//分组召唤
	{
		dwStartAddr = MAX_GROUP_AINUM*(iGroupNo-1);
		iAllDataCount = pPortParam->m_psBaoHu->AiNum - dwStartAddr;		
		dwStartAddr += pPortParam->iAiBaseAddr;
		
		if(iAllDataCount > MAX_FLOATAINUM)
		{
			iSendCount = 2;
			if((iAllDataCount - MAX_GROUP_AINUM) > 0)
			{
				iAllDataCount = MAX_GROUP_AINUM;
			}
		}
	}

	aiprovptr = (PROV_AI_PNT *)pPortParam->m_psBaoHu->AiPtr;
	for( i = 0; i < iSendCount; i++ )
	{
		commandbuf[0] = 0x68;
		commandbuf[2] = 0;
		commandbuf[3] = 0;
		commandbuf[4] = 0;
		commandbuf[5] = 0;
		commandbuf[6] = 13;		
		//commandbuf[8] = rtumsg->MsgData[15];
		commandbuf[8] = rtumsg->MsgData[8];
		if(VER_BUBAN_104 == pPortParam->RtuVersion)
		{
			commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
			// 信息体地址为2个字节
			//*((DWORD*)(&commandbuf[12])) = dwStartAddr;
			commandbuf[10] = LOBYTE(LOWORD(dwStartAddr));
			commandbuf[11] = HIBYTE(LOWORD(dwStartAddr));
			iLenth = 12;
		}
		else
		{
			commandbuf[9] = 0;
			commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
			commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);
			// 信息体地址为3个字节
			//*((DWORD*)(&commandbuf[12])) = dwStartAddr;
			commandbuf[12] = LOBYTE(LOWORD(dwStartAddr));
			commandbuf[13] = HIBYTE(LOWORD(dwStartAddr));
			commandbuf[14] = LOBYTE(HIWORD(dwStartAddr));
			iLenth = 15;
		}

		//遥测值
		if(iAllDataCount > MAX_FLOATAINUM)
		{
			iAllDataCount -= MAX_FLOATAINUM;
			iSendNum = MAX_FLOATAINUM;			
		}
		else
		{
			iSendNum = iAllDataCount;
		}

		iNo = dwStartAddr - pPortParam->iAiBaseAddr;
		for( j = 0; j < iSendNum; j++ )
		{
			GetPntMsg(aiprovptr[iNo+j].PortNo, aiprovptr[iNo+j].PntNo,
				&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
			aiprovptr[iNo+j].ChangeFlag = FALSE;
			pfValue = (float *)&commandbuf[iLenth];
			
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
			// wen 2006.07.13 修改负数的传送
			//*pfValue = SequenceHostToRtufloat((float)pntmsg.RawValue);
			//============================================================
			*pfValue = SequenceHostToRtufloat((float)((int)pntmsg.RawValue));
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

			iLenth += sizeof(float);
			commandbuf[iLenth++] = 0;
		}

		commandbuf[7] = (BYTE)j;
		commandbuf[7] |= 0x80;
		commandbuf[1] = (char)(iLenth-2);
		
		PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);

		dwStartAddr += MAX_FLOATAINUM;
	}
}
*/

void ProvBuban104SendClass2withFloat(int commid)
{
	char	commandbuf[MAX_POLLCMD_BUF_LEN];

	BOOL	bHaveData = FALSE;
	DWORD	dwStartAddr;
	int		iLenth, iSendCount=1;
	int		j, iDataNum, iCmdType;
	float	*pfValue;
	AI_DEF      pntmsg;
	PROV_AI_PNT	*aiprovptr;
	BUBAN104PORTPARAM	*pPortParam;

	pPortParam = (BUBAN104PORTPARAM *)SioParam[commid].ExtInfo;

	if(!pPortParam->m_psBaoHu->AiChange)
	{
		return;
	}

	if(pPortParam->ProvAckOrNot)
	{
		iCmdType = NORMAL_POLL_CMD;
	}
	else
	{
		iCmdType = FAST_POLL_CMD;
	}

	commandbuf[0] = 0x68;
	commandbuf[2] = 0;
	commandbuf[3] = 0;
	commandbuf[4] = 0;
	commandbuf[5] = 0;
	commandbuf[6] = 21;
	commandbuf[8] = 3;
	if(VER_BUBAN_104 == pPortParam->RtuVersion)
	{
		commandbuf[9] = LOBYTE(pPortParam->wLinkAddr);
		iLenth = 10;
	}
	else
	{
		commandbuf[9] = 0;
		commandbuf[10] = LOBYTE(pPortParam->wLinkAddr);
		commandbuf[11] = HIBYTE(pPortParam->wLinkAddr);	
		iLenth = 12;
	}
	
	// wen 2005.01.15 修改数据信息体起始地址
	dwStartAddr = pPortParam->iAiBaseAddr;
	commandbuf[6] = 13;
	//遥测值
	aiprovptr = (PROV_AI_PNT *)pPortParam->m_psBaoHu->AiPtr;
	for(j = 0, iDataNum = 0; j < pPortParam->m_psBaoHu->AiNum; j++)
	{
		if(aiprovptr[j].ChangeFlag)
		{
			iDataNum++;
			bHaveData = TRUE;

			commandbuf[iLenth++] = LOBYTE(LOWORD(dwStartAddr+j));
			commandbuf[iLenth++] = HIBYTE(LOWORD(dwStartAddr+j));
			if(VER_IEC870_5_104 == pPortParam->RtuVersion)
			{
				commandbuf[iLenth++] = LOBYTE(HIWORD(dwStartAddr+j));
			}

			GetPntMsg(aiprovptr[j].PortNo, aiprovptr[j].PntNo,
				&pntmsg, AI_PNT_TYPE, PNT_RAWVALUE);
			aiprovptr[j].ChangeFlag = FALSE;

			pfValue = (float *)&commandbuf[iLenth];
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
			// wen 2006.07.13 修改负数的传送
			//*pfValue = SequenceHostToRtufloat((float)pntmsg.RawValue);
			//============================================================
			*pfValue = SequenceHostToRtufloat((float)((int)pntmsg.RawValue));
			//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
			iLenth += sizeof(float);
			commandbuf[iLenth++] = 0;

		    //4.bug_1.2.3_20060807_3/bug_2.0.1_20060807_4 104规约不能转发第二个端口的遥测数据
			//不能操作251(原来使用255可能导致发送报文长度超过255，一个字节不能表述)
			//另外命令缓冲区应当使用char而不应当使用u_char
			if(iLenth >= 251)
			{
				break;
			}
		}
	}

	if(j >= pPortParam->m_psBaoHu->AiNum)
	{
		pPortParam->m_psBaoHu->AiChange = false;
	}

	if(bHaveData)
	{
		commandbuf[7] = (char)iDataNum;
		commandbuf[1] = (char)(iLenth-2);
		PutPollCmdToBuf(commid, iCmdType, 0, (char *)commandbuf, iLenth);
	}
}
//===========================转发数据处理结束===============================//

//===========================数据处理函数结束===============================//