增加N938 GPIO定义

app/src/main/cpp/GPIOControl.h

@@ -36,11 +36,15 @@
 #define CMD_SET_CAM_3V3_EN_STATE				132
 #define CMD_SET_12V_EN_STATE					133
 #define CMD_SET_SYSTEM_RESET  		            202
-#define CMD_SET_WTH_POWER							490
-#define CMD_SET_PULL_POWER							491
-#define CMD_SET_ANGLE_POWER							492
-#define CMD_SET_OTHER_POWER							493
-#define CMD_SET_PIC1_POWER							494
+
+
+#ifdef USING_N938
+
+#define CMD_SET_WTH_POWER						490
+#define CMD_SET_PULL_POWER						491
+#define CMD_SET_ANGLE_POWER						492
+#define CMD_SET_OTHER_POWER						493
+#define CMD_SET_PIC1_POWER						494
 #define CMD_SET_485_en0							301
 #define CMD_SET_485_en1							302
 #define CMD_SET_485_en2							303
@@ -48,8 +52,56 @@
 #define CMD_SET_485_en4							305
 
 
-#define GPIO_NODE_MP            "/dev/mtkgpioctrl"
+#define CMD_485_0_DE                            156     // 485_0 DE信号
+#define CMD_485_0_PWR_EN                        157     // 485_0 电源使能
+#define CMD_485_0_1_DE_EN                       171     // 485_0&1DE电平转换芯片使能信号
+#define CMD_485_1_DE                            172     //
+
+
+#define CMD_SET_CAM_3V3_EN_STATE				72      // 整板3V3上电使能
+#define CMD_3V3_SWITCH_EN                       45      // 整板485_3V3信号电平转换电源使能
+
+#define CMD_UART0_EN                            73      // 预留UART0电平转换芯片使能
+#define CMD_485_1_PWR_EN                        5       // 485_1 电源使能
+#define CMD_485_3_DE                            6       // 485_3 DE信号
+#define CMD_485_2_DE                            7       // 485_2 DE信号
+#define CMD_485_4_DE                            13      // 485_4 DE信号
+#define CMD_NETWORK_PWR_EN                      94      // 100M网络电源使能
+
+#define CMD_485_2_PWR_EN                        92      // 485_2 电源使能
+#define CMD_485_3_PWR_EN                        91      // 485_3 电源使能
+#define CMD_485_4_PWR_EN                        90      // 485_4 电源使能
+
+#define CMD_SEC_EN                              27      // 加密芯片上电使能
+
+#define CMD_485_2_3_DE_EN                       26      // 485_2&3 DE电平转换芯片使能信号
+
+#define CMD_5V_PWR_EN                           14      // 整板5V0上电使能
+
+#define CMD_SD_CARD_DECT                        15      // SD CARD DECT
+
+#define CMD_PIC1_EN                             16
+
+#define CMD_OTHER_EN                            21
+#define CMD_ANGLE_EN                            22
+#define CMD_PULL_EN                             23
+#define CMD_WEATHER_EN                          24
+
+#define CMD_LED_CTRL                            46
+#define CMD_BD_EN                               47
+#define CMD_ADC_EN                              44
+
+#define CMD_SPI_PWR_EN                          43      // SPI转串口电源使能
+
+
+#endif // USING_N938
+
+#ifdef USING_N938
 #define GPIO_NODE_N938          "/sys/devices/platform/1000b000.pinctrl/mt_gpio"
+#else
+#define GPIO_NODE_MP            "/dev/mtkgpioctrl"
+#endif // USING_N938
+
 
 class GpioControl
 {